The Kimfly K10 is a low-cost Android device powered by the MediaTek MT6580 chipset and designed with a large screen for basic use. However, users commonly report severe lag, recurring bootloops, system errors after failed updates, dead phones stuck at the logo, random restarts, and unreliable battery life. Camera malfunctions, touchscreen insensitivity, and inconsistent SIM/3G detection are also frequent complaints. Flashing the official firmware below is proven to resolve system crashes, remove malware, restore performance, and bring bricked or unresponsive devices back to full working order.
Kimfly K10 Firmware Details
| Device Name: | Kimfly K10 |
| Model: | K10 |
| Chipset: | MediaTek MT6580 (Quad-Core 1.3GHz) |
| GPU: | Mali-400 MP2 |
| Android Version: | Android 6.0 Marshmallow |
| Firmware Version: | 20180928_6.0 |
| Build Date: | September 28, 2018 |
| File Size: | 924MB |
| File Type: | Scatter Firmware (.zip, SP Flash Tool) |
| Flashing Tool: | SP Flash Tool (for MTK) |
| Display: | 5.5-inch IPS, 720×1280 pixels |
| RAM / Storage: | 1GB RAM / 8GB ROM (expandable via microSD up to 64GB) |
| Rear Camera: | 8MP, LED flash |
| Front Camera: | 5MP |
| Battery: | 2800mAh Li-Ion |
| SIM: | Dual SIM |
| Network: | 3G, 2G |
| Other: | FM radio, Wi-Fi, GPS, micro USB |
Download Official Firmware for Kimfly K10
This firmware is designed to unbrick stuck phones, fix slow boot, recover after failed software updates, remove custom root or malware, and reset to factory settings for optimal stability.
📄 Filename: Kimfly_K10_MT6580_20180928_6.0.zip
📦 Size: 924MB
🗓️ Build Date: September 28, 2018
🔢 Build Version: 20180928_6.0
🤖 Android Version: 6.0 Marshmallow
⬇️ Download Link: MediaFire
How to Flash the Firmware
Follow these 5 quick steps to safely flash Kimfly_K10_MT6580_20180928_6.0.zip to your phone:
- Download and extract
Kimfly_K10_MT6580_20180928_6.0.zipand get the latest SP Flash Tool on your PC. - Install the Mediatek drivers and open SP Flash Tool.
- Load the scatter file from the extracted firmware folder in SP Flash Tool.
- Turn off your Kimfly K10 and connect it to your PC via USB.
- Click “Download” and wait until you see a success checkmark. Then disconnect and reboot the phone.
For complete illustrated instructions, see this MTK flashing guide.
