Match the exact model, region, and branch name. Similar model numbers are not the same device.
Firmware files are here on Inar Guide. Tutorials, flash tools and USB drivers are on FlashGuideHub.
The Jivi Energy E12 is an affordable 4-inch smartphone, but frequent user issues include devices stuck on logo, bootloop after resets, failed updates, FRP lock, and apps crashing or not loading. Problems like frozen touchscreens, rapid battery drain, and UI lag are also commonly reported. Flashing the official stock firmware is a recommended solution to restore normal function, unbrick, and remove software faults from your E12.
This firmware is pre-tested to solve software glitches, failed upgrades, hard bricked devices, forgotten patterns, FRP lock, and malware infection. After flashing, your phone should reboot to a clean and stable stock system.
Jivi Energy E12 SPD Firmware Details
| Device Name | Jivi Energy E12 |
| Model | Energy E12 |
| Chipset | Spreadtrum SC9832A, Quad-core 1.3GHz |
| GPU | Mali-400 MP2 |
| Android Version | Android 7.0 Nougat |
| RAM / Storage | 1GB RAM / 8GB ROM, microSD up to 32GB |
| Display | 4.0-inch TFT, 480×800 pixels |
| Camera | Rear: 5MP (LED), Front: 2MP |
| Battery | 2300 mAh (removable) |
| SIM | Dual SIM (GSM+GSM) |
| Firmware Version | V2.2_20180108_SPD |
| Build Date | January 8, 2018 |
| File Size | 1.05GB |
| File Type | ZIP (PAC file included) |
| Flashing Tool | SPD Upgrade Tool (ResearchDownload) |
| Region | Global (India, EMEA) |
⚠ Warning: Using wrong firmware or interrupting the process can brick your device or erase IMEI. Back up personal data before flashing – the process wipes user files.
Download Official Firmware for Jivi Energy E12 SPD
This firmware will fix:
- Bootloop, device stuck on Jivi logo
- FRP lock or forgotten pattern/PIN
- Apps not opening, repeated crashing, failed OTA
- Performance drops and system lag
📄 Filename: Jivi_Energy_E12_V2.2_20180108_SPD.zip
📦 Size: 1.05GB
🗓️ Build Date: January 8, 2018
🔢 Firmware Version: V2.2_20180108_SPD
🤖 Android Version: 7.0 Nougat
⬇️ Download Link: MediaFire (Direct Download)
How to Flash the Firmware
Flash your Jivi Energy E12 SPD by following these 5 summarized steps:
- Extract the ZIP and install Spreadtrum USB drivers plus SPD Upgrade Tool on your PC.
- Start SPD Upgrade Tool and load the included PAC file from the firmware folder.
- Turn off the phone and connect to your PC while holding Volume Down (if needed).
- Click “Start” in SPD Upgrade Tool. Wait until flashing completes (green message).
- Disconnect and reboot once done.
Follow the full illustrated guide at this SPD upgrade guide for details.