InnJoo Max 3 3G Official Firmware MT6580_20170617_5.1 – Solve Boot, Speaker & Charging

Published:

Do you face power problems, stuck logo, faulty speaker, battery swelling, or charger issues on the InnJoo Max 3 3G? Users widely report being unable to buy replacement batteries, frequent battery swelling, phone not powering on, touchscreen glitches, and loudspeaker faults. Stuck boot, system freeze after unrooting, failed app installs, and poor after-sales support are persistent issues. The official MT6580_20170617_5.1 firmware repairs stuck boot, improves performance, fixes battery calibration and speaker audio, and restores stable Android 5.1 OS.

InnJoo Max 3 3G Firmware Details

Device Name InnJoo Max 3 3G
Model Max 3 3G
Chipset MediaTek MT6580 (quad-core, 1.3GHz Cortex-A7)
GPU Mali-400 MP1
RAM 2GB
Storage 16GB (microSD up to 128GB)
Display 6.0″ IPS LCD, 720×1280 px (244ppi)
Rear Camera 13MP autofocus, dual LED flash
Front Camera 8MP
Battery 4000 mAh Li-Po, non-removable
Android Version 5.1 Lollipop
Firmware Version MT6580_20170617_5.1
Build Date 2017-06-17
File Size 887MB
File Type ZIP archive
Flashing Tool SP Flash Tool (MediaTek)
See also
InnJoo I3 Firmware Flash File Download [Stock Rom]

Warning: Flashing incorrect or incomplete firmware leads to IMEI loss, boot loop, or bricked phone. Only flash on Max 3 3G/MT6580 models. Back up your data, charge battery above 50%, and use only original cables for flashing.

Download Official Firmware for InnJoo Max 3 3G

This pack repairs boot failure, charging issues, speaker faults, and restores default system. Not for Max 3 LTE/Pro edition.

📄 Filename: InnJoo_Max_3_3G_MT6580_20170617_5.1.zip
📦 Size: 887MB
🗓️ Build Date: 2017-06-17
🔢 Build Version: MT6580_20170617_5.1
🤖 Android Version: 5.1 Lollipop
⬇️ Download Link: Mediafire Direct


How to Flash the Firmware

  1. Backup your data (flashing erases everything).
  2. Charge Max 3 3G battery above 50%. Disconnect all peripherals.
  3. Extract the ZIP, install SP Flash Tool, load scatter file.
  4. Connect phone in download mode, start flash, wait for green success tick.
  5. Never interrupt or disconnect until complete.

Guide with step pictures: Full MediaTek flashing instructions for Max 3 3G.


Disclaimer: Flashing is done at your risk. Any data loss, bricking, IMEI loss or hardware failures are your responsibility. Comment below for further help from the community or admin.

How To Flash Different Files

LEAVE A REPLY

Please enter your comment!
Please enter your name here