The Hotwav Venus X16 Plus is a budget Android device from 2016. Given its age, it is very common for owners to experience software-related issues. Based on our research for similar devices from that period, the most frequent problems include the phone being stuck on the Hotwav loading screen (bootloop), extreme One or more of the requests have failed. Please retry. and unresponsiveness, and apps that crash or won’t open. These issues are almost always caused by corrupted system files after years of use.
The best and only way to fix these problems is to re-flash the stock firmware. This file is the official Android 5.1 (Lollipop) build for the Hotwav Venus X16 Plus. Flashing this ROM will completely restore your phone to its original factory state, removing all software errors, viruses, and lag, and making it usable again.
Hotwav Venus X16 Plus Firmware Details
| Device Name | Hotwav Venus X16 Plus |
| Model | Venus X16 Plus |
| Chipset | Spreadtrum (Board: S7358) |
| Android Version | 5.1 (Lollipop) |
| Build Date | 23-09-2016 |
| File Size | 500MB |
| File Type | .PAC (SPD Firmware) |
| Flashing Tool | SPD Upgrade Tool |
Warning: This firmware is specifically for the Hotwav Venus X16 Plus (S7358). Do NOT attempt to flash this on any other model, as it will permanently brick the device. This flashing process will erase all your personal data, including photos, contacts, and apps. Please proceed with caution.
Download Official Firmware for Hotwav Venus X16 Plus
This is the official stock ROM for the Hotwav Venus X16 Plus. No official changelog is available for this build version.
- 📄 Filename: Hotwav_Venus_X16_Plus_S7358_23092016_SPD.zip
- 📦 Size: 500MB
- 🗓️ Build Date: 23-09-2016
- 🔢 Build Version: 23092016
- 🤖 Android Version: 5.1
- ⬇️ Download Link: MediaFire
How to Flash the Firmware
To install this firmware on your Hotwav Venus X16 Plus, you will need a Windows computer, the SPD (Spreadtrum) Upgrade Tool, and the correct Spreadtrum USB drivers. This firmware is a .PAC file.
- Download and install the Spreadtrum (UNISOC) USB drivers on your PC. You must restart your computer after installation.
- Download and extract the firmware zip file to a new, easy-to-find folder.
- Download and launch the SPD Upgrade Tool.
- Click the “Load Packet” button (the single gear icon) and select the
.PACfile from the firmware folder you extracted. - Turn off your Hotwav Venus X16 Plus completely. Click the “Start Downloading” button (the play icon) in the tool, then connect your phone to the PC while pressing and holding the Volume Down key.
For a complete, in-depth guide that includes all necessary downloads, pictures, and troubleshooting steps, please see our full tutorial here.
Disclaimer: This procedure is performed entirely at your own risk. We are not responsible for any data loss, bricked devices, or other issues that may arise from flashing this firmware. By proceeding, you acknowledge that you are solely responsible for any consequences. If you encounter any problems, feel free to ask for help in the comments section below.
