The Hotwav Venus R10, built on the Spreadtrum SC7731C (SP7731CEB), was launched to offer a reliable and affordable full Android experience in African and Asian markets. By late 2017, users in Nigeria, Kenya, Ghana, and India were sharing complaints about network “No SIM” errors, stuck boot logos, random touchscreen freezing, and persistent “System UI has stopped” alerts—especially after failed updates or flashing the wrong SPD firmware. This 6.0 Marshmallow version (build 30062017, 565MB) is the only confirmed .pac file to restore normal dual SIM detection, working camera, stable Play Store, and responsive touch for Venus R10 SP7731CEB hardware. Flashing generic SPD .pacs or R10 firmware from a mismatched date almost always breaks SIM/network, touch, or results in permanent app crash at boot.
Hotwav Venus R10 SP7731CEB Firmware Details
| Device Name | Hotwav Venus R10 |
|---|---|
| Chipset | Spreadtrum SC7731C (SP7731CEB) |
| Android Version | 6.0 Marshmallow |
| RAM / Storage | 1GB RAM / 8GB ROM |
| Firmware Version | 30062017 (June 30, 2017) |
| File Size | 565MB |
| File Type | .pac (SPD Upgrade Tool/ResearchDownload) |
| Flashing Tool | SPD Upgrade Tool (ResearchDownload) |
Download Official Firmware for Hotwav Venus R10
Size: 565MB
Build Date: June 30, 2017
Chipset: Spreadtrum SC7731CEB
Android Version: 6.0 Marshmallow
Download Link: MediaFire Direct Link
Why Flash This Specific Firmware?
- Recover All Dual SIM/Network: Only this build restores the matching NVRAM and APN tables required for instant SIM and 3G/2G carrier detection, a must fix after “No SIM” errors post-update or flash.
- Fix Bootloop and “System UI” Crashes: Devices stuck at logo or seeing persistent system error after a bad update can be rescued—this scatter .pac fully rebuilds /boot, /system, and Google apps for a clean launch every time.
- Eliminate Touchscreen Lag or Dead Panel: Nigerian and Indian users often lost touch (or saw ghost input) after flashing the wrong Venus R10/R7 pd—only this firmware restores exact panel drivers and sensor mapping for 100% input area recovery.
- Repair Camera and LED Flash Problems: Many non-official .pacs left the camera black or unable to save—V10_30062017 brings back main and selfie sensors with native photo/video function.
How to Flash the Firmware
For SPD Upgrade Tool/ResearchDownload:
- Extract .zip and run SPD Upgrade Tool. Load the .pac from the extracted folder.
- Click Start Downloading (play icon). Power off device, hold Volume Down, plug USB, keep held for flashing.
- Wait (7–13 minutes) for flashing to finish—green “Passed” appears. Disconnect and reboot, test SIM, touch, Play, and camera.
Step-by-step visuals/troubleshooting: How to Use the SPD Upgrade Tool to Flash Your Smartphone
