The Hotwav Venus R2 is an Android smartphone powered by a Spreadtrum (UNISOC) chipset. It delivers modest performance and basic functionality, making it a preferred choice for budget users. However, owners have reported several issues including bootloop, FRP lock, system corruption, frequent hanging, and device not turning on after updates. These are typically caused by interrupted firmware installations or failed system updates.
The official Hotwav Venus R2 firmware helps to fix these issues by restoring the phone’s stock operating system. Flashing this firmware via the SPD Upgrade Tool (ResearchDownload) will restore the phone to factory condition, repair software bugs, and revive dead or stuck devices.
Hotwav Venus R2 Firmware Details
| Device Name | Hotwav Venus R2 |
|---|---|
| Model | Venus R2 |
| Chipset | Spreadtrum (UNISOC) |
| Android Version | 6.0 (Marshmallow) |
| Firmware Version | B1_V01.01.B01_060918 |
| Build Date | September 18, 2018 |
| File Size | 1.36 GB |
| File Type | SPD PAC firmware |
| Flashing Tool | SPD Upgrade / ResearchDownload Tool |
⚠️ Important Notice: This firmware is strictly intended for the Hotwav Venus R2. Flashing it on any other Hotwav model may result in device malfunction, screen distortion, or network loss. Back up all important data before proceeding, as the flashing process will erase the phone’s storage completely.
Download Hotwav Venus R2 Firmware
The official tested stock firmware for the Hotwav Venus R2 is listed below. Use the SPD Upgrade Tool or ResearchDownload to install it safely.
📄 Filename: Hotwav_Venus_R2_B1_V01.01.B01_060918_6.0_SPD.zip
📦 Size: 1.36 GB
🗓️ Build Date: September 18, 2018
🔢 Version: B1_V01.01.B01_060918
🤖 Android Version: 6.0 (Marshmallow)
⬇️ Download Link: Download from Google Drive
How to Flash Hotwav Venus R2 Firmware (Using SPD Upgrade Tool)
Follow these quick steps to flash the Hotwav Venus R2 firmware using the official Spreadtrum flashing method:
- Download and extract the Hotwav Venus R2 firmware on your computer.
- Install SPD USB drivers to allow your PC to recognize the phone.
- Open SPD Upgrade Tool (ResearchDownload) and load the PAC firmware file.
- Power off the phone, then connect it to your computer via USB cable.
- Click “Start Downloading” in the tool to begin the flashing process.
- Wait for the green “Passed” message, then disconnect and reboot the device.
For the complete step-by-step illustrated tutorial with driver installation and troubleshooting instructions, see this detailed flashing guide:
Why You Should Flash Hotwav Venus R2 Firmware
Installing this firmware can help resolve several software and boot-related issues, including:
- Device stuck on Hotwav logo or bootloop
- FRP or pattern lock removal
- Failed OTA or corrupted system files
- Invalid IMEI or “No Service” problem
- Dead phone recovery (no display or charging issue)
Firmware Safety & Flashing Disclaimer
This is an original Hotwav Venus R2 factory firmware (PAC format). It includes all essential partitions such as system, boot, recovery, and userdata. Avoid interrupting the flashing process or using unverified flashing tools to prevent device damage.
Disclaimer: Flashing firmware involves risks. Ensure you understand the flashing process before proceeding. We are not responsible for any damage or data loss during or after flashing the provided firmware. Users can leave a comment below if they experience any issues with the flashing procedure or need further assistance.
