As a budget-friendly device, the Bluboo D6 can develop software issues over time that hinder its performance. Many users have reported problems such as the phone becoming extremely slow, the touchscreen being unresponsive, and applications frequently crashing. One of the most common and frustrating issues is the device getting stuck on the Bluboo logo during startup, a condition known as a bootloop. Flashing the official stock firmware is the most effective way to solve these problems. This process reinstalls the original operating system, eliminates software corruption, and restores your Bluboo D6 to its factory condition.
Bluboo D6 Firmware Details
| Device | Bluboo D6 |
| Model | D6 |
| Chipset | MediaTek MT6580 |
| Android Version | 7.0 (Nougat) |
| Firmware Version | V3.04_10142018 |
| Build Date | 2018-10-14 |
| File Size | 950MB |
| File Type | .zip (Scatter Firmware) |
| Flashing Tool | SP Flash Tool |
Warning: This procedure will completely erase all data on your Bluboo D6. Make sure you back up your important photos, contacts, and files before you begin. Incorrectly flashing the firmware or an interruption during the process (like a power cut) can permanently brick your device. Please proceed with caution.
Download Official Firmware for Bluboo D6
Below is the link to the official stock ROM for the Bluboo D6. This file contains the full software package needed to perform a complete restoration of your phone.
📄 Filename: Bluboo_D6_MT6580_V3.04_10142018.zip
📦 Size: 950MB
🗓️ Build Date: 2018-10-14
🔢 Build Version: V3.04_10142018
🤖 Android Version: 7.0 Nougat
⬇️ Download Link: Download from MediaFire
How to Flash the Firmware
The Bluboo D6 is powered by a MediaTek (MTK) chipset, which requires the SP Flash Tool for firmware installation. Here are the five basic steps to follow:
- First, download and install the MediaTek VCOM USB drivers on your Windows computer so it can recognize your phone.
- Download the firmware file from the link above and extract the contents of the .zip file to a new folder on your desktop.
- Download and extract the SP Flash Tool, then launch the `flash_tool.exe` application.
- In the SP Flash Tool interface, click on the “Scatter-loading” button, then browse to the folder where you extracted the firmware and select the `MT6580_Android_scatter.txt` file.
- Turn your Bluboo D6 off completely. Click the “Download” button in the SP Flash Tool, and then, while it is still off, connect your phone to the computer using a USB cable to start the flashing process.
For a comprehensive guide that includes detailed instructions with images and videos to help you through every step, please visit this page: How to Flash Firmware on MediaTek Devices.
Disclaimer: The firmware and flashing instructions provided are for educational use. You are solely responsible for any actions taken on your device. We will not be held liable for any data loss or damage to your phone during or after this process. If you face any issues, please feel free to ask for help in the comments section.
