The Zen Admire Sense Plus is a budget 4G smartphone based on the Spreadtrum SC9832 chipset. A critical software issue, frequently mentioned in mobile repair forums, is the device displaying a white or blank screen after a factory reset or a failed software update. In this state, the phone powers on, and the backlight works, but nothing appears on the display. This indicates a display driver or bootloader conflict. Flashing the official V8.0 stock firmware is the professional solution, as it restores the correct, signed boot files and display drivers, resolving this “white screen of death” issue.
Zen Admire Sense Plus Firmware Details
| Device Name | Zen Admire Sense Plus |
|---|---|
| Chipset | Spreadtrum SC9832 |
| Android Version | 7.0 Nougat |
| Firmware Version | V8.0 |
| Build Date | October 20, 2017 |
| File Size | 1022 MB (~1.0 GB) |
| File Type | .pac (for SPD Upgrade Tool) |
| Flashing Tool | SPD Upgrade Tool / ResearchDownload |
Download Official Firmware for Zen Admire Sense Plus
Size: 1022 MB
Build Date: October 20, 2017
Chipset: Spreadtrum (SPD)
Android Version: 7.0 Nougat
Download Link: MediaFire Direct Link
Why Flash This Specific Firmware?
- Fix White/Blank Screen Issue: This is the most crucial reason for using this firmware. It reinstalls the correct display drivers and kernel configuration needed by the device’s specific screen panel, fixing the common problem where the phone turns on with a lit but empty screen.
- Repair a Bricked Device Stuck on Logo: If the phone fails to boot past the Zen logo, the operating system is corrupted. Flashing this full PAC file erases the corrupted partitions and installs a fresh, working copy of the system, effectively unbricking the device.
- Remove Viruses and Malware: Entry-level phones are often targeted by malware. A full firmware flash is the most thorough way to remove any malicious software, as it formats the entire system and reinstalls clean, official software from scratch.
Some of the Bug / Firmware Fixes
- Firmware V8.0 (Oct 20, 2017): This build contains the validated display initialization scripts required to prevent the “white screen” issue after a system reset.
- Restores the NVRAM partition, which can fix “Invalid IMEI” or “No Service” errors that occur after flashing incorrect files or performing a bad format.
- Fixes a bug where the proximity sensor would stop working during calls, causing the screen to stay on.
- Improves overall system stability and addresses memory leak issues that caused the phone to become progressively slower over time.
How to Flash the Firmware (4-Step Summary)
Flashing the `.pac` firmware onto your Zen Admire Sense Plus requires the SPD Upgrade Tool. Follow these steps:
-
Load the Firmware: Download and extract the firmware ZIP file. Launch the SPD Upgrade Tool, click the gear icon (“Load packet”), and open the
Zen_Admire_Sense_Plus... .pacfile. -
Prepare for Flashing: Click the play icon (“Start Downloading”) to put the tool into standby mode, ready to connect to your phone.
-
Connect the Phone: Power off your device completely. Press and hold the Volume Up (+) and Volume Down (-) buttons together, and then connect the phone to your PC with a USB cable.
-
Monitor and Complete: The tool will detect the phone and start the process. Wait until you see the green “Passed” message. You can then safely disconnect your phone and turn it on.
Need more detail, screenshots, or troubleshooting? For the complete, step-by-step guide: Visit our official tutorial: How to Use the SPD Upgrade Tool
