Download Zen Cinemax Click MT6537 V6 Official Firmware

The Zen Cinemax Click is a budget Android 5.1 Lollipop device powered by a MediaTek MT6537 chipset. A well-documented vulnerability for this and similar MediaTek phones, frequently discussed in repair forums, is the corruption of the NVRAM partition, leading to a complete loss of network signal and “Invalid IMEI” errors. This issue often arises after faulty software modifications or sudden power loss. This official V6 stock firmware provides the complete software package, including the essential files to restore your IMEI and baseband, making the device fully functional again.

Zen Cinemax Click Firmware Details

Download Official Firmware for Zen Cinemax Click

Why Flash This Specific Firmware?

• Fix “Invalid IMEI” and Restore Network: This is the primary reason for flashing this device. The firmware rewrites the corrupted NVRAM partition, restoring your original IMEI numbers and fixing the “No Service” or “Baseband Unknown” error that renders the phone unable to connect to a mobile network.
• Resolve Random System Freezes: As reported by users on community forums, the device can suffer from random, complete freezes that make it unusable. A clean flash with this stock ROM eliminates system file corruption that causes this instability.
• Unbrick a Dead or Bootlooping Phone: If your Cinemax Click is stuck on the boot logo, won’t turn on, or is otherwise unresponsive, this firmware is the definitive solution to restore the bootloader and system software.
• Remove Root or Malware: Return your device to a 100% pure, unmodified factory state, removing any root access, malicious software, or bloatware that may be causing performance or security issues.

Some of the Bug / Firmware Fixes

• Firmware V6 (December 10, 2016): A key stability update that patches the NVRAM corruption vulnerability, directly addressing the widespread “Invalid IMEI” problem that was common on the MT6537 platform.
• Addresses kernel-level issues that caused the system UI to hang and become unresponsive, fixing the random freeze reports from users.
• Improves power management to resolve issues with the device not waking up from sleep mode or requiring a forced reboot.
• Reinstalls the original audio and graphics drivers, fixing glitches like distorted speaker sound or graphical artifacts during video playback.

How to Flash the Firmware

Flashing the firmware onto your Zen Cinemax Click requires the SP Flash Tool for MediaTek devices. Follow these steps:

1. Download and install MTK VCOM USB Drivers on your computer.
2. Download and extract the Zen_Cinemax_Click_MT6537_V6_10122016.zip file.
3. Launch the SP Flash Tool and load the `scatter.txt` file from the extracted folder.
4. Select the “Download Only” mode for a standard flash.
5. Click the “Download” button in SP Flash Tool.
6. Power off your Zen Cinemax Click completely. Do not connect the USB cable yet.
7. While the phone is off, connect it to your computer via USB cable. SP Flash Tool should detect the device and begin the flashing process (a red then yellow progress bar).
8. Wait for the process to complete, which will be confirmed with a green circle and a “Download OK” message.
9. Disconnect the phone and power it on. The first boot may take 5-10 minutes.

For a complete guide with screenshots and driver downloads, please visit our official tutorial: How to Flash Stock Firmware to MediaTek (MTK) Smartphones.