Swipe Slate 8 K706L1 Firmware Flash File Download [Stock Rom]

The Swipe Slate 8 (K706L1) is an 8-inch tablet powered by the MediaTek MT6580 chipset, running Android 5.1 Lollipop. A significant issue frequently reported by users on Russian tech forums like 4PDA and demonstrated in various repair guides is the device freezing or getting stuck on the Swipe boot logo. This bootloop state often occurs unexpectedly or after a factory reset attempt, rendering the tablet completely unusable. Flashing the official stock firmware is the standard and most effective method to fix this software corruption by rewriting the entire system partition and restoring the tablet to its factory state.

Swipe Slate 8 (K706L1) Firmware Details

Download Official Firmware for Swipe Slate 8 (K706L1)

Why Flash This Specific Firmware?

• Fix Bootloop and “Hang on Logo”: This is the most critical fix. The firmware provides a complete reinstallation of the operating system, which is the only reliable way to repair a tablet that will not boot past the manufacturer’s logo.
• Resolve Extreme Lag and Unresponsiveness: With only 1GB of RAM, the Swipe Slate 8 becomes very sluggish over time. A full firmware flash cleans all system and data partitions, restoring the tablet’s original performance and responsiveness.
• Remove Screen Lock and FRP: If you have forgotten the pattern, PIN, or password for your tablet, or if it’s stuck on the Google Factory Reset Protection (FRP) screen, flashing this firmware will remove these security locks.
• Repair Dead Boot or No Power-On: For devices that are completely unresponsive but are still detected by a PC as a “MediaTek Preloader” port, this firmware can be used to revive the dead tablet by rewriting the bootloader.

Some of the Bug / Firmware Fixes

• Firmware (Sept 23, 2016): This stable factory build contains the necessary bootloader and system files to resolve the software corruption that causes the tablet to freeze on the Swipe logo.
• Restores the original modem and NVRAM partitions, fixing issues like null IMEI, no network signal, or Wi-Fi connectivity problems.
• Corrects memory management leaks in the Android 5.1 build, which directly addresses the severe lag and frequent app crashes reported by users after extended use.
• Reinstalls the original touchscreen drivers, fixing potential unresponsiveness or “ghost touch” issues.

Crucial Prerequisites Before Flashing

• Backup All Data: The flashing process will completely erase all data on your tablet.
• Charge Your Tablet: Ensure the battery is charged to at least 60% to prevent it from shutting down during the flashing process.
• Install MediaTek Drivers: You must install MTK VCOM USB drivers on your Windows PC.
• Download the Flashing Tool: You will need the SP Flash Tool.
• Use a Quality USB Cable: For a stable connection, use a reliable micro USB cable.

How to Flash the Firmware

Flashing the scatter file firmware onto your Swipe Slate 8 requires the SP Flash Tool. Follow these steps:

1. Download and extract the firmware Swipe_Slate_8_K706L1_MT6580_20160923.zip file on your computer.
2. Launch the SP Flash Tool application.
3. Click on the “Scatter-loading File” button and navigate to the extracted firmware folder to select the MT6580_Android_scatter.txt file.
4. Ensure the flashing mode is set to “Download Only”. Do not use “Format All + Download” unless absolutely necessary.
5. Click the green “Download” button at the top of the tool.
6. Power off your Swipe Slate 8 completely.
7. Connect the tablet to your computer via USB cable. The tool should detect it automatically and begin the flashing process. (If it’s not detected, try connecting while holding the Volume Down button).
8. Wait for the process to complete, which will be confirmed with a large green checkmark pop-up.
9. Disconnect the tablet and power it on. The first boot can take 5 to 10 minutes.

For a complete guide with screenshots and more details, please visit our official tutorial: How to Flash Stock Firmware on MediaTek Smartphones.