Myphone Royal R6 Firmware Flash File Download [Stock Rom]

The MyPhone Royal R6 is an entry-level Android smartphone released in 2017 as part of MyPhone’s budget lineup. It featured a 5-inch display, Spreadtrum SC7731 quad-core processor, and 1GB RAM, running on Android 7.0 Nougat. Like many MyPhone devices of this period, users quickly encountered issues such as bootloops after OTA updates, loss of IMEI, frequent random reboots, and lag due to memory limitations. Flashing the official stock firmware is often the only reliable method to bring the Royal R6 back to working condition.

This page provides the original firmware package Myphone_Royal_R6_V2.0_20170808_SPD.zip with instructions and direct download links. Since it uses a Spreadtrum chipset, the correct tool for flashing is the SPD Upgrade Tool.

MyPhone Royal R6 Firmware Details

Here are the key details of this firmware build:

Download Official Firmware for MyPhone Royal R6

• Build: V2.0 (20170808)
  • File Name: Myphone_Royal_R6_V2.0_20170808_SPD.zip
  • Size: ~714MB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

Insights from Filipino forums, local repair shops, and MyPhone-focused tech groups highlight these main reasons for flashing the Royal R6 firmware:

• Bootloop recovery: OTA updates often bricked the device; reflashing restores it to a clean state.
• Repair “No IMEI / No Signal” problems: Many users lost network connectivity after factory resets. The stock firmware reinstalls baseband files.
• Stabilize the system: Reduces lag and freezes caused by corrupted system apps.
• Fix random reboots: A known bug on early builds caused restarts during calls or DTV use.
• Remove unwanted shop-installed apps: Refurbished units often came with malware or adware. A clean flash wipes them out.

Bug Fixes from the Firmware

• Repairs bootloop after failed OTA update.
• Restores proper IMEI and mobile network signal.
• Fixes random reboot during calls and app usage.
• Improves memory handling on Android 7.0 for smoother multitasking.
• Removes third-party bloatware injected by unauthorized sellers.

Crucial Prerequisites Before Flashing

Before proceeding, please ensure:

• Backup personal data — flashing erases everything.
• Install Spreadtrum USB drivers on your computer.
• Extract the firmware package completely to a folder without spaces.
• Charge the device to at least 50%.

How to Flash the Firmware

The MyPhone Royal R6 must be flashed with the SPD Upgrade Tool on Windows. The steps are straightforward:

1. Extract Myphone_Royal_R6_V2.0_20170808_SPD.zip fully.
2. Install Spreadtrum USB drivers on your PC.
3. Open SPD Upgrade Tool and load the .pac firmware file.
4. Power off the phone and connect it while holding Volume Down.
5. Click Start Downloading in the tool and wait until flashing completes.
6. Reboot the device; first boot may take several minutes.

For a full tutorial with screenshots, follow:

→ How to Flash Firmware Using SPD Upgrade Tool

Disclaimer: Flashing firmware carries risk. Proceed carefully — incorrect usage can permanently damage the device. We are not responsible for any loss or damage.