Myphone MY77 DTV Firmware Flash File Download [Stock Rom]

The MyPhone MY77 DTV is a 5.5-inch smartphone released in 2016 as part of MyPhone’s Digital TV lineup. It shipped with Android 6.0 Marshmallow, powered by the Spreadtrum SP7731CEA quad-core processor and paired with 1GB of RAM. Like many budget devices in the MY series, the MY77 DTV suffered from performance bottlenecks and frequent software glitches. Owners commonly reported that the phone would freeze, randomly reboot, or fail to boot after attempting an OTA update. The built-in Digital TV app was also prone to crashing or refusing to launch after firmware corruption. For users facing these issues, flashing the original stock ROM is the most reliable way to restore full stability.

This article provides the official firmware package Myphone_MY77_DTV_SP7731CEA_V1.07_20161026_6.0_SPD.zip and outlines the essential flashing details. Since this is a Spreadtrum (Unisoc) device, it requires the SPD Upgrade Tool or equivalent software for installation.

MyPhone MY77 DTV Firmware Details

Below are the confirmed attributes of the MY77 DTV firmware package:

Download Official Firmware for MyPhone MY77 DTV

• Build: V1.07_20161026
  • File Name: Myphone_MY77_DTV_SP7731CEA_V1.07_20161026_6.0_SPD.zip
  • Size: ~1.16GB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

Community feedback across Filipino forums, NeedROM pages, and repair blogs highlights several real-world reasons why owners flash this ROM:

• Recover from bootloop or stuck logo: Failed OTA updates or accidental file deletions often leave the MY77 DTV stuck at the MyPhone logo. Reflashing with the official PAC file restores the original partitions.
• Fix DTV app crashes: The phone’s unique selling point — its built-in Digital TV tuner — frequently stops working if the firmware gets corrupted. Users report that only a clean stock ROM reinstallation revives the DTV feature.
• Restore lost IMEI / network: Owners complain of “Invalid IMEI” or “No Service” after incorrect wipes. Flashing the stock firmware restores proper baseband and modem files.
• Remove random reboots and lag: Low RAM and an aging Android build mean instability is common. A fresh ROM installation eliminates accumulated errors and restores usable performance.
• Repair bricked devices after rooting: Many attempted root guides for the SP7731 chipset led to soft bricks. The stock firmware is considered the only safe recovery path.

Bug Fixes from the Firmware

• Resolves OTA update failures that left devices unbootable.
• Restores Digital TV tuner functionality when the app refuses to launch.
• Fixes “No Signal” issues linked to corrupted NVRAM/IMEI.
• Stops system instability such as random freezes and reboots.
• Removes leftover malware/bloatware injected by third-party shops.

Crucial Prerequisites Before Flashing

Prepare carefully before using the SPD Upgrade Tool:

• Back up all accessible data — the flash will erase user storage.
• Install Spreadtrum/Unisoc USB drivers on your PC.
• Download and extract the firmware ZIP fully to a new folder.
• Use a reliable USB cable and ensure your PC does not power off during flashing.

How to Flash the Firmware

Here’s a concise outline (full guide linked below):

1. Extract Myphone_MY77_DTV_SP7731CEA_V1.07_20161026_6.0_SPD.zip into a folder.
2. Install the Unisoc/Spreadtrum USB drivers on your PC.
3. Launch the SPD Upgrade Tool and load the .pac firmware file.
4. Power off the phone and connect it to the PC via USB while holding the correct key (often volume down).
5. Click Start Downloading and wait for the flashing to complete successfully.
6. Disconnect and reboot the device; the first boot may take several minutes.

For the complete step-by-step guide with screenshots:

→ How to Flash Firmware Using SPD Upgrade Tool

Disclaimer: Flashing Spreadtrum firmware is risky. Incorrect use can permanently damage your device. Proceed only if you are confident and accept full responsibility.