The Myphone Hammer Energy is a ruggedized Android phone with a large 5000mAh battery, MediaTek MT6737T quad-core chipset, 2GB RAM, 16GB storage, and Android 7.0 Nougat (on this firmware build). While durable externally, it is not immune to software degradation: users may experience lag, freezing, random reboots, battery drain, and bootloops (phone stuck at Myphone/Hammer logo or restarting endlessly). System file corruption, bad updates, or app conflicts are common triggers. A full re-flash with the official scatter firmware via SP Flash Tool is the most effective way to restore original factory performance and stability.
This is a scatter ROM and should be flashed only with SP Flash Tool (MTK platform, Windows). Flashing will erase all user data.
Myphone Hammer Energy MT6737T Firmware Details
Verify your device hardware against this reference table:
| Attribute | Details |
|---|---|
| 📱 Device | Myphone Hammer Energy (MT6737T) |
| 🆔 Chipset | MediaTek MT6737T quad-core 1.5GHz |
| 🤖 Android OS | 7.0 Nougat |
| âś… Build | 201017_7.0 |
| đź“‚ File Type | Scatter Firmware |
| đź’» Flashing Tool | SP Flash Tool |
Download Official Firmware for Myphone Hammer Energy (MT6737T)
- Build: 201017_7.0
- File Name: Myphone_Hammer_Energy_MT6737T_201017_7.0.zip
- Size: 1.09GB
- đź”— Download Link: Download (Google Drive)
Why Flash This Specific Firmware?
- Recover from Bootloop and Freezing: If the phone is stuck at logo, endlessly restarting, or unresponsive, a full scatter flash can repair corrupted partitions.
- Fix App Crashes, Lag, and Bugs: Clean firmware install resolves issues from buggy apps, malware, or system clutter.
- Repair Camera, Battery, and Wireless Issues: Reflashing can fix camera launch failures, Wi-Fi/Bluetooth dropouts, and sudden shutdowns related to software bugs.
- Unbrick or Restore Dead/Unresponsive Devices: If your Hammer Energy is detected by SP Flash Tool, a clean flash will usually restore it unless there is an underlying hardware fault.
Crucial Prerequisites Before Flashing
Backup your data before starting—this process erases all user content.
- SP Flash Tool (for Mediatek scatter ROMs).
- MediaTek VCOM/Preloader USB drivers installed on your Windows PC.
How to Flash the Firmware
- Download and extract
Myphone_Hammer_Energy_MT6737T_201017_7.0.zip. - Install all Mediatek VCOM/preloader USB drivers on your computer.
- Open SP Flash Tool, click on “Scatter-loading”, and load the
MT6737T_Android_scatter.txtfile from the extracted firmware. - Leave the flashing mode as “Download Only”.
- Power off the phone (the battery is non-removable).
- Click the “Download” button, then connect the phone to your PC via USB.
- Wait for the green check mark indicating “Download OK”.
Step-by-step visual help: How to Flash Stock Firmware to Mediatek (MTK) Smartphones
Disclaimer: Flashing firmware is a risky procedure that erases all data and can permanently damage your device if done incorrectly. Proceed with caution and only if you are familiar with the process.
