The Mobicel U2 is a budget Android phone with a MediaTek MT6580 chipset. Like many entry-level models, it’s vulnerable to critical failures: recurring bootloops (stuck at logo), “Monkey Virus” and persistent malware or pop-up ads, complete device death after a bad flash or battery draining, or IMEI/network loss after updates or wipes.
A full firmware reinstallation from a computer is the primary repair for these issues. This post provides the official Mobicel U2 scatter ROM for SP Flash Tool.
Mobicel U2 Firmware Details
| Attribute | Details |
|---|---|
| 📱 Device | Mobicel U2 |
| 🆔 Chipset | MediaTek MT6580 |
| 🤖 Android OS | 6.0 |
| ✅ Build Version | MDD_230621 |
| 📂 File Type | MT6580 Scatter Firmware |
| 💻 Flashing Tool | SP Flash Tool |
Download Official Firmware for Mobicel U2
- Build: MDD_230621
- File Name: Mobicel_U2_MT6580_MDD_230621_6.0.zip
- Size: 1.00GB
- 🔗 Download Link: Download (MediaFire)
Why Flash This Specific Firmware?
- Fix Bootloops After Battery Drain or Updates: If your phone is stuck at the Mobicel logo or keeps rebooting, a complete ROM flash is usually the only fix—especially after battery issues or unsuccessful wipes.
- Unbrick a Dead Device: If the device won’t power on or be detected by PC after a failed flash attempt or software error, this is the recommended unbrick/restore method.
- Remove Persistent Malware (Monkey Virus): Ads, pop-ups, and system-level viruses that survive factory resets can only be eliminated by a full firmware reinstallation.
- Restore IMEI/Network, Recovery, Camera, Wi-Fi: Corrupt system, missing IMEI, no SIM/network, broken camera, or non-working Wi-Fi all stem from partition failures solved only by stock ROM flashing.
Crucial Prerequisites Before Flashing
- The latest SP Flash Tool
- Correct MediaTek VCOM USB drivers installed on Windows
Backup your files first—flashing wipes the phone.
How to Flash the Firmware
- Extract
Mobicel_U2_MT6580_MDD_230621_6.0.zipto a new folder. - Install MediaTek VCOM drivers if needed.
- Open SP Flash Tool and load
MT6580_Android_scatter.txtfrom the firmware folder. - Set mode to “Download Only” and click Download.
- Power off the phone. Connect to PC (remove/re-insert battery if needed) to start flashing.
Visual steps and tips available here:
→ How to Flash MediaTek Devices Using SP Flash Tool
Disclaimer: Flashing the wrong ROM or interrupting the process can permanently brick your phone. Proceed only if sure this matches your exact model; not responsible for loss or irreparable damage.
