Mobicel Pure Plus Firmware Flash File Download [Stock Rom]

The Mobicel Pure Plus is a budget Android smartphone powered by the MediaTek MT6580 quad-core processor and shipped with Android 7.0 Nougat. With only 1GB RAM and 8GB storage, users frequently report major slowdowns, unstable app performance, system freezing, random reboots, and recurring bootloops (device stuck at the Mobicel or Android logo). Freezing or glitching screens, power cycles, or outright failure to boot are often the result of system partition corruption, failed updates, malware, or battery drops. Performing a clean flash with the official SP Flash Tool scatter firmware is the only reliable method to restore original factory function and eliminate entrenched software faults.

This is an official scatter ROM release. Flash only with the SP Flash Tool on a Windows PC.

Mobicel Pure Plus Firmware Details

Reference hardware configuration for firmware compatibility and troubleshooting:

Download Official Firmware for Mobicel Pure Plus

• Build: ZA_190917_7.0
  • File Name: Mobicel_Pure_Plus_MT6580_ZA_190917_7.0.zip
  • Size: 1.35GB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

• Fix Persistent Bootloop and Freezing: Phone stuck at the Mobicel logo, keeps restarting, or constant freezing—flashing this scatter ROM resets all core firmware components.
• Restore After Failed Updates or Virus: If the phone failed a system update, or software became buggy after malware or bad apps, only a full reflash can restore its function.
• Repair Battery-Related Crashes: Replace firmware first before assuming hardware fault for power/boot problems (Android phones can crash due to low/weak batteries).
• Unbrick or Recover Glitched Devices: Black screen, no system response, or random reboots can be fixed by full firmware reinstallation as long as device can connect to PC in “preloader”/Meta mode.

Crucial Prerequisites Before Flashing

Back up any accessible files—the flash deletes all data and settings.

• SP Flash Tool (MTK scatter firmware flasher for Windows).
• MediaTek VCOM Preloader USB drivers must be installed.

How to Flash the Firmware

1. Download and extract Mobicel_Pure_Plus_MT6580_ZA_190917_7.0.zip.
2. Install MediaTek USB preloader/VCOM drivers on your computer.
3. Open SP Flash Tool and click “Scatter-loading”.
4. Select the file MT6580_Android_scatter.txt from the firmware folder.
5. Leave the tool in “Download Only” mode.
6. Turn off the phone (and remove battery if possible).
7. Click “Download” and connect the phone via USB to start flashing.
8. Wait for a green check “Download OK” confirmation.

For a full visual guide: How to Flash Stock Firmware to Mediatek (MTK) Smartphones

Disclaimer: Firmware flashing erases all data and can brick phones if done incorrectly or interrupted. Always read flashing guides in full before proceeding. No liability for hardware risk.