M-Horse Top S7 Firmware Flash File Download [Stock Rom]

The M-Horse Top S7 is a budget smartphone running Android 5.1 on a Spreadtrum SC7731 chipset. While functional, this combination of older hardware and software is prone to significant issues. Users of similar devices often report problems like the phone getting stuck in a bootloop, severe battery drain when connected to Wi-Fi, and the device becoming completely unresponsive after a failed software update.

When your phone is stuck, bricked, or suffering from a critical software bug, the most effective solution is to perform a full firmware reinstallation from a computer. This guide provides the official stock ROM for the M-Horse Top S7. As this is a Spreadtrum device, the firmware comes in a .pac file format and must be flashed using the SPD Upgrade Tool (also known as ResearchDownload).

M-Horse Top S7 Firmware Details

Below are the technical specifications for the M-Horse Top S7 firmware. This package will restore your phone to its original factory software and is essential for fixing deep software corruption.

Download Official Firmware for M-Horse Top S7

This is the official factory firmware for the M-Horse Top S7. The zip archive contains the .pac file needed for flashing with the SPD Upgrade Tool.

• Build: V09_20160723
  • File Name: M-Horse_Top_S7_V09_20160723_SPD.zip
  • Size: 388MB
  • 🔗 Download Link: Download (Google Drive)

Why Flash This Specific Firmware?

Flashing the official stock ROM provides direct solutions to real-world problems reported by users of Spreadtrum and other budget Android devices:

• Fix “Stuck on Boot Logo” After Reset: A very common issue is a phone getting stuck on the M-Horse logo, even after a factory reset. This indicates a corrupted system file that a simple wipe can’t fix. Flashing this full firmware package overwrites the damaged files and allows the phone to boot correctly.
• Resolve Severe Wi-Fi Battery Drain: Some Android 5.1 devices suffer from a bug where the battery drains extremely quickly when Wi-Fi is enabled, even if the phone is idle. This is often caused by a system process getting stuck in a loop. Reinstalling a clean OS with this firmware can fix this specific, frustrating issue.
• Unbrick a Dead or Unresponsive Phone: If your M-Horse Top S7 is completely dead (no power, no charge light, not detected by PC) after a failed update or software error, a low-level flash with the SPD Upgrade tool is the standard procedure to revive the Spreadtrum chipset.
• Remove Pop-up Ads and Malware: If your phone is plagued by pop-up ads that appear everywhere or apps that install themselves, it is infected with system-level malware. A full firmware flash is the only way to be 100% certain that all malicious code has been removed.

Crucial Prerequisites Before Flashing

This procedure will erase all data. Back up your files if possible.

• The latest version of the SPD Upgrade Tool.
• The correct Spreadtrum USB drivers installed on your Windows PC.

How to Flash the Firmware

This is a Spreadtrum device and must be flashed with the SPD Upgrade Tool by loading the .pac file.

1. Download and extract the firmware file (M-Horse_Top_S7_V09_20160723_SPD.zip) to find the .pac file inside.
2. Install the Spreadtrum drivers on your PC.
3. Launch the SPD Upgrade Tool, click the gear icon (‘Load packet’), and select the firmware’s .pac file.
4. Click the ‘Start downloading’ (Play) button to put the tool into standby mode.
5. Power off your phone completely. Press and hold the Volume Down key, then connect it to the PC with a USB cable to begin flashing.

For a complete, step-by-step tutorial with screenshots, please follow our master guide:

→ How to Use the SPD Upgrade Tool to Flash Your Smartphone

Disclaimer: Flashing a Spreadtrum device carries inherent risks. Using the wrong firmware or having the process interrupted can permanently brick your phone. We are not responsible for any damage or data loss. Proceed with extreme caution.