M-Horse N10 Firmware Flash File Download [Stock Rom]

The M-Horse N10 was an ultra-budget 3G smartphone designed for the most basic mobile needs. It runs Android 5.1 Lollipop on a low-power Spreadtrum SC7731 processor and is equipped with a critically low amount of RAM (typically 1GB or less). This hardware is severely underpowered for the operating system, leading to a deeply compromised user experience. The most common problems include constant system-wide freezing, debilitating lag that makes the phone almost unusable, and frequent application crashes as the system runs out of memory. These issues often escalate into more severe failures, such as the phone getting stuck in a bootloop or rebooting randomly. For owners of this device, performing a clean installation of the stock firmware is the only reliable method to address these deep-seated software problems.

This guide provides the official stock ROM package for the M-Horse N10. As a Spreadtrum (UNISOC) device, it must be flashed using the SPD Upgrade Tool.

M-Horse N10 Firmware Details

Below are the key specifications for the M-Horse N10. This firmware will restore the device to its Android 5.1 Lollipop software. Note that this is a Spreadtrum device and requires the SPD Upgrade Tool.

Download Official Firmware for M-Horse N10

• Build: 5.1
  • File Name: M_Horse_N10_5.1.zip
  • Size: 501MB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

A full firmware reinstallation is the only practical solution for the severe, hardware-induced problems this phone faces:

• Fix a Startup Bootloop: If your phone is stuck restarting at the M-Horse logo, flashing this firmware is the definitive method to fix it if the cause is software corruption. It replaces the entire damaged operating system with a clean copy.
• End Crippling System Freezes: To combat the constant hangs and unresponsiveness caused by the limited RAM, a clean installation of the Android 5.1 OS clears out all software clutter, giving the system its best chance to operate without freezing.
• Resolve Unreliable Wireless Connections: If you are experiencing frequent Wi-Fi or Bluetooth drops, flashing the firmware will reinstall the original radio firmware and drivers, which can solve persistent software-level connectivity bugs.
• Recover an Unresponsive “Bricked” Phone: In a worst-case scenario where a software error has left the phone completely unresponsive, forcing a firmware flash using the SPD Upgrade Tool is the last available recovery method.

Crucial Prerequisites Before Flashing

Before you begin, back up any accessible data. This procedure will permanently delete everything on the phone.

• The latest version of the SPD Upgrade Tool.
• The correct Spreadtrum USB drivers installed on your PC.

How to Flash the Firmware

This firmware is in .pac format and must be installed using the SPD Upgrade Tool on a Windows computer. Here is a brief overview:

1. Download and extract the M_Horse_N10_5.1.zip file to a new folder.
2. Install the required Spreadtrum USB drivers on your computer.
3. Launch the SPD Upgrade Tool (UpgradeDownload.exe).
4. Click the first “Load packet” gear icon and select the .pac file from the extracted firmware folder.
5. Click the “Start downloading” (Play) button.
6. Completely power off your M-Horse N10 and remove the battery.
7. Hold the Volume Down button on your phone and connect it to the PC via a USB cable.
8. The flashing process will begin automatically and will show a green “Passed” message when complete.

For a complete, step-by-step tutorial with screenshots, please follow our master guide:

→ How to Use the SPD Upgrade Tool to Flash Your Smartphone

Disclaimer: Flashing a Spreadtrum device is an advanced procedure that will erase all your data and carries a significant risk of permanently damaging your device if not done correctly. We are not responsible for any data loss or hardware failures. Proceed with extreme caution.