Lyf Water 2 (LS-5008) Firmware Flash File Download [Stock Rom]

The Lyf Water 2 (LS-5008) was released in 2016 as a mid-range offering, featuring the capable octa-core Qualcomm Snapdragon 615 processor, 2GB of RAM, and a 5-inch HD display. It ran on Android 5.1 Lollipop and was noted for its smooth initial performance. However, over time, users have encountered significant software-related problems. The most common issues reported on tech forums are the device getting stuck in a bootloop, becoming completely unresponsive (dead), or suffering from severe lag and hanging issues. User reviews also frequently mention rapid battery drain as a major pain point, even after a full charge.

For a device exhibiting these symptoms, especially if it’s completely dead or stuck in a loop, a full firmware reinstallation is the most effective recovery method. This process, often called flashing, replaces all operating system files, resolving deep-seated software corruption. The Lyf Water 2 uses a Qualcomm chipset, so flashing must be done with the QFIL tool.

Lyf Water 2 (LS-5008) Firmware Details

Below are the specifications for the Lyf Water 2. This firmware package will restore your device to its original Android 5.1 software state. Remember, due to its Qualcomm chipset, this ROM must be flashed using QFIL.

Download Official Firmware for Lyf Water 2 (LS-5008)

Both links below contain the same firmware build (v1.0.0B10) but are packaged differently (.zip and .rar). Download the one you prefer.

• Build: RJIO_IN_P839F30V1.0.0B10_DL
  • File Name: Lyf_Water_2_LS_5008_RJIO_IN_P839F30V1.0.0B10_DL.zip
  • Size: 914MB
  • 🔗 Download Link: Download (MediaFire)
• Build: RJIO_IN_P839F30V1.0.0B10_DL
  • File Name: Lyf_Water_2_LS_5008_RJIO_IN_P839F30V1.0.0B10_DL_MobileGuRu4.com.rar
  • Size: 791MB
  • 🔗 Download Link: Download (MediaFire)

Why Flash This Specific Firmware?

Reinstalling the stock ROM is a powerful troubleshooting step that can fix many common and critical issues:

• Recover a Dead Phone: If your Lyf Water 2 will not power on or show any signs of life, forcing a flash in EDL mode is the primary method to revive it from a software-induced “hard brick”.
• Fix a Bootloop: This firmware will resolve issues where the phone is stuck restarting or hangs indefinitely at the Lyf logo during startup.
• Eliminate System Lag and Hanging: A clean installation of the Android 5.1 OS removes corrupted files and software bloat that cause the phone to freeze or perform poorly.
• Address Battery Drain Issues: Software glitches are a common cause of poor battery life. Flashing the original firmware can restore the phone’s power management to its intended state and potentially improve battery performance.
• Restore Original IMEI and Baseband: In cases where the IMEI number is lost or “null” after rooting or other modifications, flashing the stock ROM is a necessary first step to restoring network connectivity.

Crucial Prerequisites Before Flashing

This process will permanently erase all data on the device. Back up anything important if you can access the phone’s storage.

• The latest version of the QPST package, which includes the QFIL tool.
• The correct Qualcomm HS-USB QDLoader 9008 drivers installed on your Windows PC.

How to Flash the Firmware

This firmware must be installed using the QFIL (Qualcomm Flash Image Loader) tool. This process requires booting the phone into EDL (Emergency Download) Mode.

1. Download and extract the firmware file (e.g., Lyf_Water_2_LS_5008_...zip) into a new folder on your computer.
2. Install the Qualcomm USB drivers and the latest QPST/QFIL tool.
3. Open the QFIL application.
4. Power off your Lyf Water 2 completely.
5. Enter EDL Mode by pressing and holding both the Volume Up and Volume Down buttons, then connect the phone to your PC via USB cable. The screen will stay black, but your computer’s Device Manager should show a “Qualcomm HS-USB QDLoader 9008” port.
6. In QFIL, ensure “Flat Build” is selected.
7. Click “Browse” next to the “Programmer Path” and select the prog_emmc_firehose_...mbn file from the firmware folder you extracted.
8. Click “Load XML” and select the rawprogram...xml file, then select the patch...xml file when the second window appears.
9. Click the “Download” button to start the flashing process. Do not disconnect the device until it is complete.

For a complete, step-by-step tutorial with screenshots, please follow our master guide:

→ How to Install ROM with Qualcomm Flash Image Loader (QFIL)

Disclaimer: Flashing firmware is an advanced procedure that will erase all your data and carries a risk of permanently bricking your device if not performed correctly. We are not responsible for any data loss or hardware damage. Proceed with caution.