Lyf Wind 2 LS-6001 Firmware Flash File Download [Stock Rom]

The Lyf Wind 2 (LS-6001) was a large 6-inch phablet released by Reliance’s Lyf brand in 2016. It offered respectable specifications for a budget device, including a MediaTek MT6735M processor, 2GB of RAM, and a 2850mAh battery, running a stock version of Android 5.1 Lollipop. Over time, however, users may encounter issues related to software degradation or aging hardware. The most critical problem reported for these devices is getting stuck in a bootloop (where the phone endlessly restarts) or experiencing random reboots during normal use. While this can be a symptom of a failing battery, it is very often caused by corrupted system files. Other software-related issues include system lag, crashing apps, and unreliable Wi-Fi or Bluetooth connections. Before considering a hardware repair, a clean installation of the stock firmware is the essential first step to rule out any software-based problems.

This guide provides three official stock ROM packages for the Lyf Wind 2. It is a MediaTek device and must be flashed using the SP Flash Tool.

Lyf Wind 2 (LS-6001) Firmware Details

Below are the key specifications for the Lyf Wind 2. This firmware will restore the device to its Android 5.1 Lollipop software. Note that this is a MediaTek device and requires SP Flash Tool.

Why Flash the Stock Firmware on Your Lyf Wind 2?

A full firmware reinstallation is the best strategy to address the specific software flaws of this phone:

• Fix a Startup Bootloop: This is the most important fix. If your phone is stuck in a restart loop, flashing the SW_VER_R25 firmware is the definitive way to fix it if the cause is software-related. If the problem persists after a successful flash, the battery has likely failed.
• End Random Reboots: An unstable system can restart on its own. Reinstalling the base system files from the latest Android 5.1 ROM can resolve the software corruption that triggers these crashes and improve stability.
• Improve System Performance: If your phone has become slow and laggy, reinstalling the SW_VER_R25 firmware will clear out accumulated junk files and restore the phone to its original performance by providing a clean operating system.
• Stabilize Wireless Connections: For unstable Wi-Fi or Bluetooth that disconnects frequently, a full firmware flash restores the original radio drivers and can solve persistent connectivity bugs.
• Resolve Camera or App Freezes: If the camera or other essential apps freeze or crash during use, a clean install of the SW_VER_R25 build can fix this by removing software conflicts and freeing up system resources.
• Recover an Unresponsive “Bricked” Phone: In a worst-case scenario where a software error has left the phone completely unresponsive, forcing a firmware flash using a PC is the last available recovery method.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This procedure will permanently delete everything on the phone.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Lyf Wind 2 (LS-6001)

Three versions are available. The build labeled SW_VER_R25 has the highest version number and is the most recommended for optimal stability. The two older R16 builds are provided as alternatives.

• Build: SW_VER_R25 (Latest & Recommended)
  • File Name: Lyf_Wind_2_LS-6001_MT6735M_SW_VER_R25.zip
  • Size: 809MB
  • 🔗 Download Link: Download (MediaFire)
• Build: R16_040616 (Older Version)
  • File Name: LYF_Wind_2_LS-6001_MT6735M_SW_VER_R16_040616.zip
  • Size: 737MB
  • 🔗 Download Link: Download (Google Drive)
• Build: R16_040316 (Oldest Version)
  • File Name: Lyf_Wind_2_LS-6001_MT6735M_R16_040316.zip
  • Size: 737MB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool on a Windows computer. The process requires loading the “scatter” file contained within the firmware package. Here is a brief overview:

1. Download and extract your chosen firmware .zip file to a new folder.
2. Install the required MediaTek VCOM USB drivers on your computer.
3. Launch the SP Flash Tool software (flash_tool.exe).
4. Click the “Scatter-loading” button and select the MT6735M_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Lyf Wind 2.
6. Ensure the dropdown menu in SP Flash Tool is set to “Download Only” and click the green “Download” arrow.
7. Connect your powered-off phone to the PC via a USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and essential troubleshooting tips, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: This is an advanced procedure that will erase all your data and carries the risk of permanently damaging your device if not done correctly. We are not responsible for any data loss or hardware failures. Proceed with caution.