Leagoo Leapad 7S Firmware Flash File Download [Stock Rom]

The Leagoo Leapad 7S was a 7-inch budget tablet from 2017 that, like many devices in its class, was built with hardware that was barely adequate for its software. It used a low-power MediaTek MT6580 processor and was equipped with a restrictive 1GB of RAM to run the Android 6.0 Marshmallow operating system. This severe memory limitation is the root cause of the device’s most significant problems. The tablet is known for experiencing debilitating system-wide freezes, where the entire user interface becomes unresponsive for extended periods, a situation that users report gets even worse as the battery drains. Other common software-induced failures include the camera app refusing to open and showing only a black screen, or the device being unable to maintain a stable Wi-Fi connection. For owners of this tablet, performing a clean re-flash of the stock firmware is the only effective way to clear out all residual data and give the limited hardware a fresh start, which is necessary to address these fundamental performance and stability flaws.

This guide provides the official stock ROM package for the Leagoo Leapad 7S, allowing you to perform a complete reinstallation of the operating system.

Leagoo Leapad 7S Firmware Details

Below are the key specifications for this Leagoo Leapad 7S firmware. This will restore the device to its Freeme OS software, based on Android 6.0 Marshmallow. This is a MediaTek device and requires the SP Flash Tool.

Why Flash the Stock Firmware on Your Leagoo Leapad 7S?

A full firmware reinstallation is the only practical solution for the severe, hardware-induced problems this tablet faces:

• End Frustrating System Freezes: If your tablet locks up and becomes totally unresponsive to touch, especially when the battery is low, a clean OS install is the only way to clear the RAM and address the software conflicts causing the freezes.
• Fix a “Dead” Camera: When opening the camera app results in nothing but a black screen, it indicates a software driver has crashed. Reinstalling the firmware is the most reliable way to restore the OS’s connection to the camera hardware.
• Resolve Unstable Wi-Fi: For a tablet that consistently drops its Wi-Fi signal or fails to connect at all, flashing the firmware can fix corrupted connectivity drivers that a simple network reset won’t touch.
• Stop Random Restarts: The limited RAM makes this device prone to kernel panics, which cause it to reboot unexpectedly. Reinstalling a clean OS can improve stability and reduce the frequency of these random reboots.
• Break Out of a Bootloop: If your tablet is permanently stuck on the Leagoo loading animation, its operating system is corrupted beyond repair. The only fix is to manually re-flash the entire software package.
• Recover an Unresponsive Tablet: If a software error has caused your tablet to become completely “bricked” and show no signs of power, forcing a firmware flash from a computer is the last-resort recovery method.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This procedure will permanently delete everything on the tablet.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo Leapad 7S

• Build Date: 2017-02-16
  • File Name: Leagoo_Leapad_7S_MT6580_6.0_20170216.zip
  • Size: 1.02GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool on a Windows or Linux computer. The process requires loading the “scatter” file contained within the firmware package. Here is a brief overview:

1. Download and extract the Leagoo_Leapad_7S_..._20170216.zip file to a new folder on your PC.
2. Install the required MediaTek VCOM USB drivers on your computer.
3. Launch the SP Flash Tool software (flash_tool.exe).
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo Leapad 7S.
6. Ensure the dropdown menu in SP Flash Tool is set to “Download Only” and click the green “Download” arrow.
7. Connect your powered-off tablet to the PC via a USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and essential troubleshooting tips, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: This is an advanced procedure that will erase all your data and carries the risk of permanently damaging your device if not done correctly. We are not responsible for any data loss or hardware failures. Proceed with caution.