Leagoo Leapad 8 Firmware Flash File Download [Stock Rom]

The Leagoo Leapad 8 was a budget tablet from 2017 designed for media consumption, featuring a large 8-inch HD display and a substantial 4000mAh battery. However, to keep costs low, it was equipped with very modest hardware: a MediaTek MT6580 processor and just 1GB of RAM. This hardware struggles to run Android 6.0 Marshmallow smoothly on a large screen, leading to severe performance lag, app crashes, and potential battery life issues. For owners of this tablet, reinstalling the official stock firmware is the only effective way to perform a clean factory reset and restore a baseline level of usability.

This guide provides the official stock ROM package for the Leagoo Leapad 8, allowing you to perform a complete software reinstallation.

Leagoo Leapad 8 Firmware Details

Below are the key specifications for the Leagoo Leapad 8. This firmware will restore the device to its original Android 6.0 Marshmallow software.

Why Flash the Stock Firmware on Your Leagoo Leapad 8?

Flashing the stock firmware is essential for addressing the critical performance issues caused by the tablet’s underpowered hardware:

• Fix Extreme Performance Lag: This is the primary reason to flash. A clean OS install is the only effective way to handle the severe system-wide lag caused by running Android 6.0 on a large screen with only 1GB of RAM.
• Resolve Abnormal Battery Drain: A fresh OS can fix software bugs and remove rogue processes that cause the large 4000mAh battery to drain much faster than it should, restoring its key feature.
• Resolve “Insufficient Storage” Errors: Wipes the device clean, freeing up the limited 8GB of internal storage to allow essential system functions and a few apps to run.
• Stop Constant App Crashes: Solves persistent “force close” errors caused by the device running out of memory, even during basic multitasking.
• Fix Bootloop Errors: The only reliable method to fix a tablet that is stuck on the Leagoo startup logo.
• Unbrick Your Device: Can revive a tablet that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the tablet’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo Leapad 8

• Build Date: 20171212
  • File Name: Leagoo_Leapad_8_MT6580_20171212_6.0.zip
  • Size: 838 MB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_Leapad_8_MT6580_20171212_6.0.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo Leapad 8.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off tablet to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.