Leagoo Leapad 7i Firmware Flash File Download [Stock Rom]

The Leagoo Leapad 7i was a 7-inch budget tablet from 2017 designed for basic media consumption. It was built with extremely limited hardware, featuring a MediaTek MT6580 processor and a restrictive 1GB of RAM to run the Android 6.0 Marshmallow operating system. This severe memory shortage is the direct cause of the tablet’s most critical flaws. The user experience is defined by frequent and long system freezes, where the device becomes completely unresponsive for many seconds at a time during simple tasks like browsing or opening an app. This constant struggle for memory also leads to other failures, such as the camera app showing a black screen instead of launching, or apps crashing back to the home screen immediately after being opened. For anyone attempting to use this tablet, a complete firmware re-flash is the only effective measure to wipe the device’s storage and give the operating system a clean slate, which is essential to address these fundamental performance problems.

This guide provides the official stock ROM package for the Leagoo Leapad 7i, allowing you to perform a clean reinstallation of the operating system.

Leagoo Leapad 7i Firmware Details

Below are the key specifications for this Leagoo Leapad 7i firmware. This will restore the device to its Android 6.0 Marshmallow software. This is a MediaTek device and requires the SP Flash Tool.

Why Flash the Stock Firmware on Your Leagoo Leapad 7i?

A full firmware reinstallation is the only practical way to address the severe, hardware-induced problems this tablet faces:

• Cure Persistent System Freezes: If your tablet locks up and becomes completely unresponsive to touch during normal use, a clean OS install is the only way to clear the memory and address the software conflicts causing the hangs.
• Fix a Non-Functional Camera: When opening the camera app results in a black screen or an error message, it means the operating system has failed to initialize the camera hardware. A firmware re-flash is the most reliable way to restore this driver-level connection.
• Resolve Unstable Wi-Fi Connectivity: For a tablet that struggles to find, connect to, or maintain a stable Wi-Fi network, reinstalling the firmware and its associated drivers can fix software corruption that a simple network reset cannot.
• Stop Apps from Crashing on Launch: If apps immediately close after you tap on them, it’s a clear sign the system has no available RAM. A clean firmware installation frees up the maximum possible memory to allow these essential apps to run.
• Break Out of a Bootloop: If your tablet is permanently stuck on the Leagoo loading animation, its operating system is corrupted beyond repair. The only fix is to manually re-flash the entire software package.
• Recover an Unresponsive Tablet: If a software error has caused your tablet to become completely “bricked” and show no signs of power, forcing a firmware flash from a computer is the last-resort recovery method.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This procedure will permanently delete everything on the tablet.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo Leapad 7i

• Build Date: 2017-09-08
  • File Name: Leagoo_Leapad_7i_MT6580_20170908.zip
  • Size: 1.02GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool on a Windows or Linux computer. The process requires loading the “scatter” file contained within the firmware package. Here is a brief overview:

1. Download and extract the Leagoo_Leapad_7i_..._20170908.zip file to a new folder on your PC.
2. Install the required MediaTek VCOM USB drivers on your computer.
3. Launch the SP Flash Tool software (flash_tool.exe).
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo Leapad 7i.
6. Ensure the dropdown menu in SP Flash Tool is set to “Download Only” and click the green “Download” arrow.
7. Connect your powered-off tablet to the PC via a USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and essential troubleshooting tips, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: This is an advanced procedure that will erase all your data and carries the risk of permanently damaging your device if not done correctly. We are not responsible for any data loss or hardware failures. Proceed with caution.