Leagoo P1 Firmware Flash File Download [Stock Rom]

The Leagoo P1 was a budget smartphone from 2017 that stood out for one major reason: its massive 4000mAh battery. Marketed as a “battery phone,” it was designed for users who prioritized endurance above all else. However, to keep the price low, it was equipped with very modest hardware, including a MediaTek MT6580A processor, a minimal 1GB of RAM, and 8GB of internal storage. While it ran Android 7.0 Nougat, the limited RAM often led to severe performance lag and software inefficiencies that could cause abnormal battery drain, undermining the phone’s main purpose. For owners experiencing these issues, reinstalling the official stock firmware is the best way to restore the device’s performance and battery life.

This guide provides the official stock ROM package for the Leagoo P1, allowing you to perform a clean software installation.

Leagoo P1 Firmware Details

Below are the key specifications for the Leagoo P1. This firmware will restore the device to its original Android 7.0 Nougat software.

Why Flash the Stock Firmware on Your Leagoo P1?

Flashing the stock firmware is essential for resolving the critical issues caused by the device’s limited hardware:

• Fix Abnormal Battery Drain: This is the most important reason to flash. A clean install can fix software bugs and remove rogue processes that cause the large 4000mAh battery to drain much faster than expected, restoring its key feature.
• Fix Extreme Performance Lag: A clean OS install is the only effective way to handle the severe system-wide lag caused by running Android 7.0 on just 1GB of RAM.
• Resolve “Insufficient Storage” Errors: Wipes the device clean, freeing up the very limited 8GB of internal storage to allow essential system functions to run without constant errors.
• Stop Constant App Crashes: Solves persistent “force close” errors caused by the device running out of available memory.
• Fix Bootloop Errors: The only reliable method to fix a phone that is stuck on the Leagoo startup logo.
• Unbrick Your Device: Can revive a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo P1

• Build Date: 180905
  • File Name: Leagoo_P1_MT6580_180905_7.0.zip
  • Size: 1.17 GB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_P1_MT6580_180905_7.0.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo P1.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.