Leagoo Leapad 10 Firmware Flash File Download [Stock Rom]

The Leagoo Leapad 10 was a 10.1-inch budget tablet from 2017 designed for media consumption and long-lasting use, thanks to its huge 5000mAh battery. It featured a large HD display, a MediaTek MT6580 quad-core processor, 2GB of RAM, and 16GB of storage, all running on Android 5.1 Lollipop. While the large screen and battery were its main attractions, the entry-level processor often struggled to provide a smooth experience, leading to noticeable lag during multitasking and general use. For owners experiencing these performance issues, reinstalling the official stock firmware is the best way to restore the device to its original, optimized state.

This guide provides the official stock ROM package for the Leagoo Leapad 10, allowing you to perform a clean software installation.

Leagoo Leapad 10 Firmware Details

Below are the key specifications for the Leagoo Leapad 10. This firmware will restore the device to its original Android 5.1 Lollipop software.

Why Flash the Stock Firmware on Your Leagoo Leapad 10?

Flashing the stock firmware is the most effective way to address the specific performance bottlenecks and software issues affecting this tablet:

• Fix Performance Lag: This is the most critical reason to flash. User reviews noted that the device lags when multitasking. A clean firmware installation restores the tablet’s responsiveness by removing software clutter.
• Resolve Abnormal Battery Drain: Optimizes the software to ensure the massive 5000mAh battery delivers its intended long life, free from rogue apps or bugs causing unnecessary power consumption.
• Improve System Stability: A clean flash can fix issues that lead to app crashes or system freezes, which can occur when the limited hardware is overwhelmed.
• Remove Viruses and Malware: If your tablet has been infected with malware, a full firmware flash is the only way to guarantee its complete removal.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the tablet’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Leagoo Leapad 10

• Build Date: 20170614
  • File Name: Leagoo_Leapad_10_MT6580_20170614_WLT.zip
  • Size: 573 MB
  • 🔗 Download Link: Download (Google Drive)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Leagoo_Leapad_10_..._WLT.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Leagoo Leapad 10.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off tablet to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.