Gfive Stark Firmware Flash File Download [Stock Rom]

The Gfive Stark is an ultra-budget smartphone designed for the most basic tasks. It features a 5.45-inch display, a MediaTek MT6580 quad-core processor, a minimal 1GB of RAM, and 16GB of internal storage. To cope with this modest hardware, the device runs on Android 9.0 Pie (Go Edition), a lightweight version of Android optimized for low-end devices. However, even with a “Go” OS, a device with only 1GB of RAM is highly prone to severe performance degradation and storage issues over time. For owners of this phone, reinstalling the official stock firmware is often the only way to restore it to a usable state.

This guide provides the official stock ROM package for the Gfive Stark, allowing you to perform a clean software installation and wipe the device clean.

Gfive Stark Firmware Details

Below are the key specifications for the Gfive Stark. This firmware will restore the device to its original Android 9.0 Pie (Go Edition) software.

Why Flash the Stock Firmware on Your Gfive Stark?

Due to its very limited hardware, flashing the stock firmware is essential for addressing the critical performance issues that make this device difficult to use:

• Fix Severe Performance Lag: This is the most important reason to flash. A clean OS install is the only effective way to handle the extreme system-wide lag that makes even basic navigation nearly impossible.
• Resolve “Insufficient Storage” Errors: Wipes the device clean, freeing up the tiny 16GB of internal storage to allow the operating system and essential apps to function.
• Stop Constant App Crashes: Solves persistent “force close” errors and application instability caused by the device running out of its limited 1GB of RAM.
• Remove Viruses and Malware: If your device has been infected with malware that is difficult to remove, a full firmware flash will completely erase it.
• Fix Bootloop Errors: The only reliable way to fix a phone that is stuck on the Gfive startup logo and will not boot.
• Unbrick Your Device: Revives a phone that has become completely unresponsive due to a software error.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Gfive Stark

• Build Date: 220225
  • File Name: Gfive_Stark_MT6580_16G_1G_V01_220225_9.0.zip
  • Size: 988 MB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Gfive_Stark_MT6580_16G_1G_V01_220225_9.0.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6580_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Gfive Stark.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.