Elephone G9 Firmware Flash File Download [Stock Rom]

The Elephone G9 was an ultra-budget, compact 4G smartphone released in 2015. It was designed for basic use, featuring a small 4.5-inch display, a MediaTek MT6735M quad-core processor, a minimal 1GB of RAM, and 8GB of internal storage. Shipping with Android 5.1 Lollipop, the device’s extremely limited hardware meant that it was highly susceptible to severe performance degradation over time. For owners of this phone, reinstalling the official stock firmware is often the only way to clear out accumulated data and restore the device to a minimally functional state.

This guide provides the official stock ROM package for the Elephone G9, allowing you to perform a clean software installation and wipe the device clean.

Elephone G9 Firmware Details

Below are the key specifications for the Elephone G9. This firmware will restore the device to its original Android 5.1 Lollipop software.

Why Flash the Stock Firmware on Your Elephone G9?

Due to its very limited hardware, flashing the stock firmware is essential for addressing the critical performance issues that make this device difficult to use:

• Fix Extreme Performance Lag: This is the primary reason to flash. A clean OS is necessary to address the severe, system-wide lag that makes even basic navigation a challenge.
• Resolve “Insufficient Storage” Errors: Wipes the device clean, freeing up the tiny 8GB of internal storage to allow essential apps to function.
• Stop Constant App Crashes: Solves persistent “force close” errors caused by the device running out of its limited 1GB of RAM.
• Improve Battery Life: A fresh install can remove rogue background processes that drain the small 1750mAh battery.
• Fix Bootloop Errors: The only reliable way to fix a phone that is stuck on the Elephone startup screen.
• Unbrick Your Device: Revives a phone that has become completely unresponsive.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This process will completely erase all data from the phone’s internal storage.

• The latest version of the SP Flash Tool.
• The correct MediaTek VCOM USB drivers installed on your PC.

Download Official Firmware for Elephone G9

• Build Date: 150803
  • File Name: Elephone_G9_K08SS_150803.zip
  • Size: 818 MB
  • 🔗 Download Link: Download Here

How to Flash the Firmware

This firmware must be installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware. Here is a summary of the steps:

1. Download and extract the Elephone_G9_K08SS_150803.zip file to a new folder on your computer.
2. Ensure the MediaTek VCOM USB drivers are properly installed on your PC.
3. Launch the SP Flash Tool software.
4. Click the “Scatter-loading” button and select the MT6735_Android_scatter.txt file from the extracted firmware folder.
5. Completely power off your Elephone G9.
6. In SP Flash Tool, confirm the mode is set to “Download Only,” then click the green “Download” button.
7. Connect your powered-off phone to the computer via USB cable to begin the flashing process.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.