The Elephone A4 was a budget-friendly smartphone from 2018 that stood out by incorporating several design trends from more expensive phones. It featured a large 5.85-inch “notched” display with a 19:9 aspect ratio and a side-mounted fingerprint scanner. The device was powered by a MediaTek MT6739 quad-core processor, came with 3GB of RAM, and ran Android 8.1 Oreo. While its design was modern, its entry-level hardware could lead to performance issues and software instability over time. For owners looking to resolve these problems or fix a bricked device, reinstalling the official stock firmware is the most reliable solution.
This guide provides the official stock ROM package for the Elephone A4, enabling you to perform a clean software installation and restore the phone to its factory state.
Elephone A4 Firmware Details
Below are the key specifications for the Elephone A4. This firmware is the official software release for the MT6739 variant of the device.
| Attribute | Details |
|---|---|
| 📱 Device | Elephone A4 |
| 🆔 Chipset | MediaTek MT6739 |
| 🤖 Android OS | 8.1 Oreo |
| 📂 File Type | Scatter Firmware |
| 💻 Flashing Tool | SP Flash Tool |
Why Flash the Stock Firmware on Your Elephone A4?
Flashing the official stock ROM can resolve many common software problems that affect the Elephone A4, especially after extended use:
- Fix Bootloop After Update: A common issue reported for this device was getting stuck on the Elephone logo after an OTA update attempt. A manual flash is the fix.
- Restore Performance: A clean OS installation is the best way to address system-wide lag, slow app loading, and general sluggishness.
- Resolve App Instability: Solves issues with apps crashing, freezing, or behaving erratically.
- Improve Battery Life: Can fix software bugs that cause the 3000mAh battery to drain faster than normal.
- Unbrick Your Device: The definitive solution for reviving a phone that has become completely unresponsive.
⚠️ Important Prerequisites
Before you begin, back up any important data you wish to keep. This flashing process will completely erase the phone’s internal storage.
- The latest version of the SP Flash Tool.
- The correct MediaTek VCOM USB drivers installed on your PC.
Download Official Firmware for Elephone A4
- Build Date: 20180530
- File Name: Elephone_A4_MT6739_20180530.zip
- Size: 1 GB
- 🔗 Download Link: Download Here
How to Flash the Firmware
This firmware is installed using the SP Flash Tool. The process involves loading a scatter file from the downloaded firmware package. Here is a summary of the steps:
- Download and extract the
Elephone_A4_MT6739_20180530.zipfile to a new folder on your computer. - Ensure the correct MediaTek VCOM USB drivers are installed on your PC.
- Launch the SP Flash Tool application.
- Click the “Scatter-loading” button and select the
MT6739_Android_scatter.txtfile from the extracted firmware folder. - Completely power off your Elephone A4.
- In SP Flash Tool, confirm the mode is set to “Download Only,” and then click the green “Download” button.
- Connect your powered-off phone to the computer via USB cable to begin the flashing process.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones
Disclaimer: Flashing firmware is an advanced procedure that carries inherent risks. If instructions are not followed precisely, you could permanently damage your device. We are not responsible for any data loss or hardware issues. Proceed with caution.
