The Elephone A2 is a budget smartphone from 2018, designed to offer a large 5.5-inch screen and a basic Android experience for entry-level users. It was released with Android 8.1 Oreo (Go Edition), which is optimized for devices with 1GB of RAM or less. Given its modest hardware, the device can become very slow over time or develop software glitches. For owners looking to restore the phone to its original factory performance, fix software errors, or unbrick a faulty device, flashing the official stock firmware is the most effective solution.
This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.
Elephone A2 Firmware Details
Below are the key specifications for this official firmware package:
| Attribute | Details |
|---|---|
| 📱 Device | Elephone A2 |
| 🆔 Chipset | MediaTek MT6580 |
| 🤖 Android OS | 8.1 Oreo (Go Edition) |
| 🔢 Build Number | 20181029 |
| 📂 File Type | Scatter Firmware |
| 💻💻 Flashing Tool | SP Flash Tool |
⚠️ Important Prerequisites
Before you begin, ensure you have the necessary drivers and tools. You will need to download the SP Flash Tool and install the correct MediaTek VCOM drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.
Download Official Firmware for Elephone A2
- File Name: Elephone_A2_MT6580_20181029_8.1.0.zip
- Size: 665 MB
- 🔗 Download Link (Google Drive): Elephone A2 Firmware
How to Flash the Firmware
This device’s firmware uses a scatter file and must be installed using the SP Flash Tool. Here is a summary of the main steps:
- Download and extract the firmware package:
Elephone_A2_MT6580_20181029_8.1.0.zip. - Install the correct MediaTek VCOM USB drivers on your PC.
- Launch the SP Flash Tool and load the
MT6580_Android_scatter.txtfile from the extracted folder. - Power off your Elephone A2. As this model has a non-removable battery, ensure it is fully powered down by holding the power button.
- Set the flashing mode to “Download Only” and click the “Download” button.
- Connect the device to your computer via USB to initiate the flash.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones
Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.
