The Digma Linx Trix 4G (LS5041PL) is a budget smartphone from 2018 that offered a unique “tri-camera” system at an entry-level price point. It features a 5-inch display and ran Android 7.0 Nougat, providing a full-featured experience with 4G LTE. After years of use, its 1GB of RAM and Spreadtrum processor can lead to performance degradation and software bugs. For owners looking to restore the phone to its original factory state, fix software errors, or unbrick a faulty device, flashing the official stock firmware is the most reliable solution.
This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.
Digma Linx Trix 4G (LS5041PL) Firmware Details
Below are the key specifications for this official firmware package:
| Attribute | Details |
|---|---|
| 📱 Device | Digma Linx Trix 4G (LS5041PL) |
| 🆔 Chipset | Spreadtrum SC9832 |
| 🤖 Android OS | 7.0 Nougat |
| 🔢 Build Number | 20180615 |
| 📂 File Type | .PAC Firmware |
| 💻💻 Flashing Tool | SPD Upgrade Tool |
Why Flash the Stock Firmware?
Based on user reports and device specifications, reinstalling the official firmware can resolve several known issues on the Linx Trix 4G:
- Fix Camera App Errors: Addresses software bugs that can cause the camera application to freeze, crash, or fail to save photos.
- Resolve Unstable 4G/LTE Signal: A clean firmware install can fix issues where the mobile data connection is weak or drops frequently.
⚠️ Important Prerequisites
Before you begin, ensure you have the necessary drivers and tools. You will need to download the SPD Upgrade Tool and install the correct Spreadtrum (Unisoc) USB drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.
Download Official Firmware for Digma Linx Trix 4G (LS5041PL)
- File Name: Digma_Linx_Trix_4G_LS5041PL_20180615_SPD.zip
- Size: 923 MB
- 🔗 Download Link (Google Drive): Digma Linx Trix 4G Firmware
How to Flash the Firmware
This device’s firmware is a .pac file and must be installed using the SPD Upgrade Tool. Here is a summary of the main steps:
- Download and extract the firmware package:
Digma_Linx_Trix_4G_LS5041PL_20180615_SPD.zip. - Install the correct Spreadtrum (Unisoc) USB drivers on your PC.
- Launch the SPD Upgrade Tool and load the
.pacfirmware file from the extracted folder. - Power off your Digma Linx Trix 4G. This model has a removable battery, so taking it out for 10 seconds is recommended to ensure a full power down.
- Connect the device to your computer while holding the Volume Down key to initiate the flash.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Use the SPD Upgrade Tool to Flash Your Smartphone
Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.
