Digma Vox S502 4G Firmware Flash File Download [Stock Rom]

The Digma Vox S502 4G (VS5013ML) is a budget phablet from 2016, designed for media consumption with its large 5.5-inch HD display and 4G LTE capabilities. Running Android 6.0 Marshmallow, it offered a modern experience for its time. However, with 1GB of RAM, the device can become prone to software issues, performance degradation, and bugs. For owners looking to restore the phone to its original factory state, fix software errors, or unbrick a faulty device, flashing the official stock firmware is the most reliable solution.

This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.

Digma Vox S502 4G (VS5013ML) Firmware Details

Below are the key specifications for this official firmware package:

Why Flash the Stock Firmware?

Based on user reports and device specifications, reinstalling the official firmware can resolve several known issues on the Vox S502 4G:

• Fix Unstable 4G/LTE Connectivity: Addresses software bugs that can cause the mobile data connection to frequently drop or fail to reconnect.
• Resolve Inaccurate GPS Lock: A clean firmware install can fix issues where the GPS has trouble getting a fast or accurate location lock.
• Unbrick Your Phone: Revives a device that fails to boot past the Digma logo or is completely unresponsive.

⚠️ Important Prerequisites

Before you begin, ensure you have the necessary drivers and tools. You will need to download the SP Flash Tool and install the correct MediaTek VCOM drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.

Download Official Firmware for Digma Vox S502 4G (VS5013ML)

• File Name: Digma_Vox_S502_4G_MT6735M_20170112.zip
• Size: 758 MB
• 🔗 Download Link (Google Drive): Digma Vox S502 4G Firmware

How to Flash the Firmware

This device’s firmware uses a scatter file and must be installed using the SP Flash Tool. Here is a summary of the main steps:

1. Download and extract the firmware package: Digma_Vox_S502_4G_MT6735M_20170112.zip.
2. Install the correct MediaTek VCOM USB drivers on your PC.
3. Launch the SP Flash Tool and load the MT6735M_Android_scatter.txt file from the extracted folder.
4. Power off your Digma Vox S502 4G. This model has a removable battery, so taking it out for 10 seconds is recommended to ensure a full power down.
5. Set the flashing mode to “Download Only” and click the “Download” button.
6. Connect the device to your computer via USB to initiate the flash.

For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:

→ How to Flash Stock Firmware to MediaTek (MTK) Smartphones

Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.