The Digma Citi Power 4G (CS5026PL) is a budget smartphone from 2017, specifically designed for users who prioritize battery life. Its main feature is a large 4000mAh battery, a significant capacity for a 5-inch device of its era. Running Android 7.0 Nougat, it can be susceptible to software bugs that cause battery drain or performance issues over time. For owners looking to resolve these problems or unbrick a faulty device, flashing the official stock firmware is the most effective solution.
This guide provides the official firmware package and a clear, safe path to reinstalling the software on your device.
Digma Citi Power 4G Firmware Details
Below are the key specifications for this official firmware package:
| Attribute | Details |
|---|---|
| 📱 Device | Digma Citi Power 4G (CS5026PL) |
| 🆔 Chipset | Spreadtrum SC9832 |
| 🤖 Android OS | 7.0 Nougat |
| 🔢 Build Number | 20170726 |
| 📂 File Type | .PAC Firmware |
| 💻💻 Flashing Tool | SPD Upgrade Tool |
Why Flash the Stock Firmware?
Reinstalling the official firmware is the best solution for a variety of critical software issues on the Citi Power 4G:
- Fix Battery Drain: Can resolve software bugs that cause the large 4000mAh battery to drain faster than expected.
- Unbrick Your Phone: Revives a device that fails to boot past the Digma logo or is completely unresponsive.
- Restore Performance: A full flash is the best way to clear system memory and restore the phone’s original speed.
- Eliminate Viruses: A complete flash is the most thorough method for removing malicious software that a factory reset might miss.
⚠️ Important Prerequisites
Before you begin, ensure you have the necessary drivers and tools. You will need to download the SPD Upgrade Tool and install the correct Spreadtrum (Unisoc) USB drivers on your computer. A full backup of your device data is also highly recommended as this process will erase everything.
Download Official Firmware for Digma Citi Power 4G
- File Name: Digma_Citi_Power_4G_CS5026PL_20170726_SPD.zip
- Size: 718 MB
- 🔗 Download Link (Google Drive): Digma Citi Power 4G Firmware
How to Flash the Firmware
This device’s firmware is a .pac file and must be installed using the SPD Upgrade Tool. Here is a summary of the main steps:
- Download and extract the firmware package:
Digma_Citi_Power_4G_CS5026PL_20170726_SPD.zip. - Install the correct Spreadtrum (Unisoc) USB drivers on your PC.
- Launch the SPD Upgrade Tool and load the
.pacfirmware file from the extracted folder. - Power off your Digma Citi Power 4G. This model has a removable battery, so it’s best to take it out for 10 seconds to ensure a full shutdown.
- Connect the device to your computer while holding the Volume Down key to initiate the flash.
For a complete, step-by-step tutorial with screenshots and troubleshooting, please follow our master guide:
→ How to Use the SPD Upgrade Tool to Flash Your Smartphone
Disclaimer: Flashing firmware carries inherent risks. If instructions are not followed precisely, it could damage your device. We are not responsible for any data loss or damage. Proceed with caution.
