Download Digma Optima 8 X701 Firmware (Stock ROM & Flash File)

This page contains the official stock firmware for the Digma Optima 8 X701 tablet. This flash file is the definitive solution for users looking to resolve critical software issues, such as a device stuck on the Digma logo (bootloop), persistent system errors, virus or malware infections, or to revive a soft-bricked tablet. Reinstalling the stock ROM will restore your device to its original factory settings and performance.

Our guide provides the direct download link and a complete, step-by-step tutorial on how to use the SPD Upgrade Tool to safely flash the firmware.

Digma Optima 8 X701 Firmware Details

Here is a complete overview of the provided firmware package:

Why Should You Flash the Stock Firmware?

Reinstalling the official operating system is the most reliable way to solve a variety of deep-seated software issues:

• Unbrick Your Tablet: This firmware can revive a tablet that is completely unresponsive or fails to boot past the startup screen.
• Fix System Errors: Resolves frequent application crashes and “Android System has stopped” error messages.
• Eliminate Viruses and Malware: A complete firmware flash is the most thorough method for removing malicious software.
• Boost Performance: Restoring the clean, original OS can fix issues with lag, stuttering, and general slowness.
• Return to Factory Condition: This process will remove all user data, custom ROMs, and root access, preparing the device for sale or a fresh start.

⚠️ Important: Prerequisites Before Flashing

To ensure an error-free installation, you must complete these steps first.

• Backup Your Data: The flashing process will completely erase all data from your tablet’s internal storage.
• Charge Your Tablet: Make sure your Digma Optima 8 X701 has at least a 50-60% battery charge.
• Install Spreadtrum Drivers: Your PC needs the correct drivers to recognize your tablet. Download and install the Spreadtrum (Unisoc) SCI USB2Serial Drivers on your Windows computer.
• Download the Flashing Tool: This firmware is a .pac file and must be flashed using the SPD Upgrade Tool. You can download the latest version from a trusted source here.

Download Official Firmware for Digma Optima 8 X701

• File Name: Digma_Optima_8_X701_R1_201102_SPD.zip
• Size: 1.5 GB
• 🔗 Download Link (Google Drive): Digma Optima 8 X701 Firmware

How to Flash the .PAC Firmware File

1. 1. Download and extract both the firmware zip file and the SPD Upgrade Tool onto your PC. You will find a large .pac file inside the firmware folder.
   2. Launch the UpgradeDownload.exe application from the SPD Upgrade Tool folder.
   3. Click the first Gear icon (Load Packet) in the top-left corner of the tool.
   4. Navigate to the folder containing your extracted firmware and select the .pac file. The tool will take a few moments to load and verify the firmware.
   5. Once the file is loaded, click the Play icon (Start Downloading) to put the tool in flashing-ready mode.
   6. Completely power off your Digma Optima 8 X701 tablet.
   7. Press and hold the Volume Down button. While holding it, connect your tablet to the PC with a USB cable.
   8. The SPD Upgrade Tool will automatically detect the tablet and the flashing process will begin. You can now release the Volume Down button.
   9. Do not disconnect the tablet until the process is complete. This can take several minutes.
   10. A green “Passed” message will be displayed in the tool once the flash is successful.
   11. You may now disconnect your tablet and power it on. The first boot will take longer than usual as the system initializes.

Disclaimer: Flashing firmware is a technical process that carries inherent risks. Failure to follow the instructions precisely could damage your device. We are not responsible for any data loss or damage that may occur. Please proceed with caution.