Welcome! This page provides the official download link for the BQ Aquaris Q8 flash file (Stock ROM). If your device is experiencing software-related problems such as being stuck on the logo (bootloop), running extremely slow, or has been affected by malware, reinstalling the stock firmware is the most effective solution. This package contains the original software for the BQ Aquaris Q8, which is based on the MediaTek MT6580 chipset and runs on Android 5.1 Lollipop. Restoring the stock ROM will return your phone to its factory state, resolving deep-seated system errors and performance issues.
Using the provided BQ Aquaris Q8 firmware is the definitive way to unbrick a soft-bricked device, bypass forgotten screen locks (by wiping data), and clean the system of any unauthorized modifications like root. The process involves using the SP Flash Tool, a standard utility for MediaTek-powered devices. Follow the instructions carefully to ensure a successful restoration of your smartphone.
User Data Advisory for the BQ Aquaris Q8
Crucial Notice: Proceeding with the firmware flashing process will permanently erase all personal data on your BQ Aquaris Q8. This includes contacts, photos, videos, apps, and all internal storage contents. We strongly urge you to create a complete backup of your important files before you begin. This procedure is intended for users who are confident with manual software installation and understand the associated risks.
BQ Aquaris Q8: Quick Device Specifications
A brief overview of the key specifications of the BQ Aquaris Q8 to ensure you are downloading the firmware for the correct device.
- Device Name:
- BQ Aquaris Q8
- Release Date:
- Circa 2017
- Chipset:
- MediaTek MT6580 (Quad-core 1.3 GHz Cortex-A7)
- Display:
- 5.0 inches
- Battery:
- Approximately 2200 mAh
- RAM/Storage:
- 1GB RAM / 8GB Internal Storage (Typical for this chipset)
- Original OS:
- Android 5.1 Lollipop
Required Downloads for Flashing
You will need the following files to flash the stock firmware onto your device. Ensure you download all three components.
- SP Flash Tool (Latest Version)
- MediaTek VCOM USB Drivers
- The BQ Aquaris Q8 Firmware Package (listed below)
BQ Aquaris Q8 Firmware Download Links
| Filename | Android Version | Size | Download Link/s |
|---|---|---|---|
| BQ_Aquaris_Q8_MT6580_V1.0.2_20…zip | 5.1 Lollipop | 694MB | Download (MediaFire) |
How to Flash BQ Aquaris Q8 Firmware
Here is a summarized guide to installing the stock ROM. For a complete, detailed walkthrough with screenshots, please refer to our full guide.
- Preparation: Download and extract the BQ Aquaris Q8 firmware, SP Flash Tool, and MTK USB drivers to a folder on your PC.
- Driver Installation: Install the MediaTek VCOM drivers on your computer. You may need to disable driver signature enforcement on Windows 10/11 for a successful installation.
- Load Firmware: Launch
flash_tool.exefrom the SP Flash Tool folder. Click on the “Scatter-loading File” button and navigate to the extracted firmware folder to select theMT6580_Android_scatter.txtfile. - Select Mode & Start: Ensure the dropdown menu is set to “Download Only”. Click the large “Download” button to begin the flashing process.
- Connect Device: Power off your BQ Aquaris Q8 completely. Connect it to the PC using a quality USB cable. The flashing process will start automatically, and you will see a green tick when it is complete.
For in-depth instructions and troubleshooting for the SP Flash Tool, please visit our comprehensive guide: How to Flash Firmware on MediaTek (MTK) Smartphones.
Troubleshooting Common Issues
Even with the correct files, you might encounter some issues. Here’s how to solve common problems related to the BQ Aquaris Q8.
1. SP Flash Tool Shows a BROM Error
Cause: This is a common error with MediaTek devices, often caused by incorrect drivers, a bad USB connection, or trying to flash while the device is on.
Solution: Ensure your phone is completely powered off. Re-install the VCOM drivers correctly (disabling driver signature enforcement if needed). Try a different USB port and a high-quality USB cable. Finally, make sure you are using the latest version of the SP Flash Tool.
2. Device is Not Detected by the PC
Cause: The most common cause is a missing or improperly installed MediaTek USB driver.
Solution: Open the “Device Manager” on your PC and check for any devices with a yellow exclamation mark. Reinstall the VCOM drivers. To force detection, power off the phone, press and hold the Volume Down button, and then connect the USB cable.
3. Phone is Still Stuck on Bootloop After Flashing
Cause: Sometimes, residual cache or data can cause conflicts even after a successful flash.
Solution: After the flash completes and you see the green tick, disconnect the phone and boot it into recovery mode (usually by holding Power + Volume Up). In the recovery menu, perform a “Wipe data/factory reset” and “Wipe cache partition”. This will clean out any leftover conflicting files.
Frequently Asked Questions (FAQs)
- Can I use this firmware to upgrade my BQ Aquaris Q8 to Android 6 or 7?
- No, this is the official stock firmware package which is Android 5.1 Lollipop. It cannot be used to upgrade the Android version beyond what was officially released for the device.
- Will flashing this ROM remove root access from my BQ Aquaris Q8?
- Yes, installing the official stock ROM will completely overwrite the system partition, thereby removing root access and any custom recovery like TWRP, returning the phone to its factory state.
- Is it safe to use the “Format All + Download” option in SP Flash Tool?
- No, you should avoid this option unless you are an advanced user with a backup of your device’s NVRAM. Using “Format All + Download” will erase your IMEI number and other crucial device identifiers, which can cause network connectivity issues.
- My BQ Aquaris Q8’s screen is black and it won’t turn on after a failed flash. Is it dead?
- Not necessarily. This state is known as a “hard brick”. Often, the device can still be detected by the PC. Try holding the Volume Down button while connecting it to the computer. If SP Flash Tool can detect it, you should be able to re-flash the firmware and revive it.
Conclusion
Restoring the stock firmware on your BQ Aquaris Q8 is a powerful way to bring it back to life. Whether you’re dealing with frustrating software glitches, a bootloop, or simply want a clean start, this official flash file provides the tools you need. By following the steps outlined above, you can restore your device to its original, stable performance.
If you found this guide helpful or if you encounter a broken download link, please let us know in the comments section below. Bookmark our site for more firmware files and Android guides.
