The BQ 1057L Passion is a budget-friendly 10.1-inch Android tablet released around 2018. It is designed for everyday tasks like web browsing, social media, and video streaming, running on a Spreadtrum SC9832 chipset. This guide provides the official stock firmware package, allowing users to perform a clean software installation. This is particularly useful for fixing software-related problems such as boot loops (device stuck on the logo), frequent app crashes, or completely unresponsive (bricked) devices.
Important: Flashing the stock firmware is a powerful procedure that will completely erase all personal data, apps, and settings on your tablet. It is crucial to back up any important files before you begin this process if you can still access your device.
Quick Device Specs
- Device: BQ 1057L Passion
- Release Year: Approx. 2018
- Chipset: Spreadtrum SC9832
- Display: 10.1″ IPS
- Memory: 1GB RAM
- Storage: 16GB
- Battery: 5000 mAh
- Original OS: Android 7.0 (Nougat)
Required Downloads
To flash the firmware, you will need the SPD Upgrade Tool and the correct Spreadtrum USB drivers. You can find detailed instructions and download links for these tools in our comprehensive guide, which is linked in the flashing section below.
- Spreadtrum Upgrade Tool
- Spreadtrum SCI USB Drivers
Official Stock Firmware Package
| Build Version | Android OS | File Type | Download |
|---|---|---|---|
| V1.0_180208 | 7.0 | .pac (SPD Tool) | Download |
How to Flash Firmware on BQ 1057L Passion
Flashing the stock firmware onto your BQ 1057L Passion requires a Windows PC and the official Spreadtrum (UNISOC) flashing utility. The process involves loading the downloaded .pac firmware file into the SPD Upgrade Tool and connecting your tablet in a powered-off state. The tool will then overwrite the existing system with a fresh installation. This method is effective for reviving a bricked tablet or resolving deep-seated software errors.
For detailed, step-by-step instructions on how to use the tool and install the necessary drivers, please follow our comprehensive pillar guide: How to Use the SPD Upgrade Tool to Flash Your Smartphone.
Device-Specific Troubleshooting
- Tablet Not Detected by PC: This is almost always a driver issue. Ensure you have installed the Spreadtrum SCI USB drivers correctly. You may need to disable Driver Signature Enforcement in Windows. Try a different USB port and a high-quality USB cable as well.
- Flashing Fails at “Checking Baudrate”: If the tool gets stuck at this step, it means it cannot establish a stable connection. Press and hold the Volume Down button on your tablet *before* connecting the USB cable, and keep it held until the flashing process begins. This forces the device into the correct flashing mode.
- Red Screen or Display Issues After Flashing: In rare cases, flashing firmware meant for a slightly different hardware revision can cause display problems. This typically happens if there were multiple screen suppliers for the same model. The firmware provided here is stock, but if you face this issue, it indicates a hardware mismatch with the flashed display drivers.
- Data Loss Warning: Remember, this is not an update but a full installation. All your data, including photos, contacts, and apps, will be permanently deleted. There is no way to recover it after flashing.
FAQs
Q1. My tablet is stuck on the BQ logo. Will this fix it?
Yes. A device stuck in a boot loop is a classic sign of software corruption. Flashing the official stock firmware provided here will completely reinstall the operating system and should resolve the issue.
Q2. Do I need to unlock the bootloader to flash this firmware?
No. You do not need an unlocked bootloader to flash official firmware using the SPD Upgrade Tool. This method works on devices with locked bootloaders as it uses a low-level service mode.
Q3. The downloaded file is a .zip. Where is the .pac file?
You need to extract the contents of the downloaded .zip file first. Inside, you will find the firmware file with a .pac extension, which is the file you will load into the SPD Upgrade Tool.
Q4. Can I use this firmware to upgrade my Android version?
No. This firmware package will reinstall the original Android 7.0 operating system that came with the device. It is not an upgrade package and will not change the Android version to a newer one.
