The Archos 80 Oxygen is an 8-inch Android tablet from 2016, notable for its sleek design and Full HD display, which was a standout feature for its class. It is powered by the 64-bit MediaTek MT8163 quad-core processor and runs on Android 6.0 Marshmallow. This guide provides the official stock firmware package to perform a full software restoration on your device.
This is a complete firmware package designed to be installed using the SP Flash Tool. It is the definitive solution for a range of critical software problems, including a bricked or dead tablet, a device stuck on the Archos boot logo, or persistent software errors and crashes that a factory reset cannot solve.
⚠️ Data Deletion Warning
The flashing process will completely erase all data from your tablet’s internal storage, including:
- Contacts and call logs
- Messages and chat history
- Photos, videos, and files
- Installed apps and settings
Please back up your data before proceeding. This action is irreversible and your information cannot be recovered once erased.
Quick Device Specs
- Device: Archos 80 Oxygen (AC80OX)
- Release year: 2016
- Chipset: MediaTek MT8163
- Display: 8.0″ IPS LCD, 1920 x 1200 pixels (Full HD)
- RAM/Storage: 2GB/16GB
- Battery: 4500 mAh
- Original OS: Android 6.0 (Marshmallow)
Required Downloads
To flash this firmware, you will need the SP Flash Tool software and the correct MediaTek VCOM USB drivers for your Windows PC. You can find secure links to download these essential utilities in our main guide, which is linked in the how-to section below.
- The firmware package from the table below
- SP Flash Tool
- MediaTek VCOM USB Drivers
Official Stock Firmware (ROM)
| Build Version | Android Version | Type | Download |
|---|---|---|---|
| V02 (2016-10-11) | 6.0 Marshmallow | Stock ROM (SP Flash Tool) | Download |
How to Flash Stock Firmware
To restore the software on your Archos 80 Oxygen, you will use the SP Flash Tool on a PC. First, ensure the MediaTek VCOM drivers are properly installed. Launch the tool, load the MT8163_Android_scatter.txt file from the extracted firmware folder, and select the “Download Only” mode. Click the “Download” button. Power off your tablet completely, then connect it to your PC with a USB cable to start the flashing process.
For a complete, step-by-step walkthrough, driver downloads, and troubleshooting, please refer to our detailed pillar guide: How to Flash Stock Firmware with SP Flash Tool.
Device-Specific Troubleshooting for Archos 80 Oxygen
- PC Not Detecting the Tablet: This is the most common problem and is always caused by a driver issue. Uninstall any other mobile phone drivers, restart your PC, and do a fresh install of the MediaTek VCOM drivers. The tablet should only be connected after clicking “Download” in the tool.
- SP Flash Tool “PMT changed for the ROM” Error: If you see this error, the partition layout on your tablet is different from the firmware’s. To solve this, change the dropdown option in SP Flash Tool from “Download Only” to “Firmware Upgrade” and try flashing again.
- Display Issues: The Full HD screen is a key feature. If you are experiencing strange colors, lines on the screen, or a blank display after a drop or failed update, a firmware re-flash is a good first step to rule out any software-related causes before assuming it is a hardware problem.
- Unresponsive Touch Screen After Flashing: In rare cases, a firmware flash can cause touch screen issues if the driver in the firmware is not a perfect match for the hardware panel used in your specific batch of tablets. If this happens, you may need to find an alternative firmware version for the Archos 80 Oxygen.
FAQs
- Q1. My Archos 80 Oxygen is dead after a failed update. Will this fix it?
- Yes. This full firmware package is designed to overwrite the entire software system, including a corrupted bootloader or system partition, and will unbrick a tablet with software-related issues.
- Q2. Can I use this on other Archos Oxygen tablets, like the 70 Oxygen or 101b Oxygen?
- No, absolutely not. Firmware is specific to the exact model, screen size, and chipset. This firmware is only for the 8-inch Archos 80 Oxygen and will brick other models.
- Q3. Will I lose my data by flashing this firmware?
- Yes, the SP Flash Tool process will completely erase the tablet’s internal storage, deleting all your personal data and restoring it to factory settings.
- Q4. What version of Android is this?
- This is the official stock firmware for Android 6.0 Marshmallow for the Archos 80 Oxygen.
