Looking to install the stock ROM on your Samsung Galaxy M10 SM-M105Y? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy M10 SM-M105Y Quick Specifications
- Display: 6.22-inch HD+ PLS TFT, 720 x 1520 pixels (~270 ppi density)
- Processor: Samsung Exynos 7870 Octa, Octa-core
- RAM: 2GB or 3GB
- Storage: 16GB or 32GB internal, expandable via microSDXC up to 512GB
- Operating System: Launched with Android 8.1 Oreo, upgradable to Android 10
- Rear Camera: Dual camera system with 13 MP wide and 5 MP ultrawide sensors
- Front Camera: 5 MP
- Battery: 3400 mAh non-removable
- Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, microUSB 2.0
- Other Features: 3.5mm headphone jack, FM radio, Face unlock
The Samsung Galaxy M10 SM-M105Y is a specific regional variant of the Galaxy M10, primarily sold in the Philippines and other select markets. It features a large Infinity-V display and a dual-camera setup with an ultrawide lens, offering good value for its price point.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| SMA | M105YDXU1ASC5 | 8.0 | Download Philippines (Google Drive) |
| XTC | M105YDXSACWA1 | 10 | Download Philippines (Unlocked) (SamFW) |
How to Flash Samsung Galaxy M10 SM-M105Y with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy M10 SM-M105Y to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy M10 SM-M105Y Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
