Looking to install the stock ROM on your Samsung Galaxy M01s SM-M017F? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy M01s SM-M017F Quick Specifications
- Display: 6.2-inch HD+ PLS TFT, 720 x 1520 pixels (~271 ppi density)
- Processor: MediaTek Helio P22, Octa-core
- RAM: 3GB
- Storage: 32GB internal, expandable via microSDXC up to 512GB
- Operating System: Launched with Android 9.0 Pie, upgradable to Android 11
- Rear Camera: Dual camera system with 13 MP wide and 2 MP depth sensors
- Front Camera: 8 MP
- Battery: 4000 mAh non-removable
- Connectivity: 4G LTE, Wi-Fi 802.11 b/g/n, Bluetooth 4.2, microUSB 2.0
- Other Features: Rear-mounted fingerprint sensor, 3.5mm headphone jack, FM radio
The Samsung Galaxy M01s SM-M017F is a budget-friendly smartphone primarily released for markets in Asia. It offers a large display, a dual-camera setup, and a fingerprint sensor, which was an upgrade from its predecessor, the Galaxy M01.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| BKD | M017FXXS2CWD3 | 11 | Download Bangladesh (SamFW) |
| INS | M017FXXS2CWD3 | 11 | Download India (SamFW) |
| NPL | M017FXXS2CWD3 | 11 | Download Nepal (SamFW) |
| SLK | M017FXXS2CWD3 | 11 | Download Sri Lanka (SamFW) |
How to Flash Samsung Galaxy M01s SM-M017F with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy M01s SM-M017F to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy M01s SM-M017F Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
