Looking to install the stock ROM on your Samsung Galaxy Note 20 SM-N981U1? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.
Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.
Samsung Galaxy Note 20 SM-N981U1 Quick Specifications
- Display: 6.7-inch FHD+ Super AMOLED Plus, 2400 x 1080 pixels (~393 ppi density), 60Hz refresh rate
- Processor: Qualcomm Snapdragon 865+, Octa-core
- RAM: 8GB
- Storage: 128GB or 256GB internal
- Operating System: Launched with Android 10, upgradable to Android 13
- Rear Camera: Triple camera system with a 12 MP main sensor, 64 MP telephoto lens with 3x hybrid zoom, and a 12 MP ultrawide lens
- Front Camera: 10 MP
- Battery: Non-removable Li-Ion 4300 mAh with 25W fast charging, 15W wireless charging, and 4.5W reverse wireless charging
- Connectivity: 5G, Wi-Fi 6, Bluetooth 5.0, GPS, NFC, USB Type-C 3.2
- Other Features: S Pen support, ultrasonic under-display fingerprint sensor, IP68 dust/water resistance, stereo speakers tuned by AKG, no microSD card slot
The Samsung Galaxy Note 20 SM-N981U1 is the unlocked U.S. variant of the Galaxy Note 20 5G. It is powered by the Snapdragon 865+ processor and is a solid device with a versatile camera and the signature S Pen, though it has a flat display and a plastic back, unlike its Note 20 Ultra counterpart.
Downloads:
| CSC | Version | Android Version | Download Links |
|---|---|---|---|
| ATT | N981U1UESDHYG1 | 13 | Download (AT&T) United States (SamFW) |
| TMB | N981U1UESDHYG1 | 13 | Download (T-Mobile) United States (SamFW) |
| USC | N981U1UESDHYG1 | 13 | Download United States (SamFW) |
| VZW | N981U1UESDHYG1 | 13 | Download (Verizon Wireless) United States (SamFW) |
| XAA | N981U1UESDHYG1 | 13 | Download United States (Unlocked) (SamFW) |
| XAS | N981U1UESDHYG1 | 13 | Download United States (Unlocked) (SamFW) |
How to Flash Samsung Galaxy Note 20 SM-N981U1 with Odin
- Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
- Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 20 SM-N981U1 to your PC.
- Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
- Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
- Load the Galaxy Note 20 SM-N981U1 Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
- Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
- Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.
