Samsung Galaxy Note 4 SM-N9108V Firmware Flash File Download [Stock Rom]

Looking to install the stock ROM on your Samsung Galaxy Note 4 SM-N9108V? This comprehensive guide provides direct download links for the firmware flash file and clear, step-by-step instructions to get your phone back on track.

Use this firmware file to effectively reset your phone, fix bootloop issues, bypass password locks, resolve device freezing, and address numerous other software problems.

Samsung Galaxy Note 4 SM-N9108V Quick Specifications

  • Display: 5.7-inch Super AMOLED, 2560 x 1440 pixels (~515 ppi density)
  • Processor: Qualcomm Snapdragon 805, Quad-core 2.7 GHz
  • RAM: 3GB
  • Storage: 16GB or 32GB internal, expandable via microSDXC up to 128GB
  • Operating System: Launched with Android 4.4.4 KitKat, upgradable to Android 6.0.1 Marshmallow
  • Rear Camera: 16 MP with autofocus, Smart OIS, and LED flash
  • Front Camera: 3.7 MP with f/1.9 aperture
  • Battery: Removable Li-Ion 3220 mAh with Quick Charge 2.0 support
  • Connectivity: 4G LTE (TD-LTE), CDMA, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.1, GPS, NFC, microUSB 2.0 (MHL 3.0)
  • Other Features: S Pen support, Fingerprint sensor, Accelerometer, Gyro, Proximity, Compass, Barometer, Hall, Gesture, UV, Heart Rate, SpO2 sensors, 3.5mm audio jack, Single Micro-SIM slot

The Samsung Galaxy Note 4 SM-N9108V is a specific variant of the Note 4 designed for the Chinese market. It supports TD-LTE and CDMA networks, and is powered by the high-performance Qualcomm Snapdragon 805 processor. It retains all the flagship features of the Note 4, including a stunning Quad HD Super AMOLED display, a versatile S Pen, and a camera with optical image stabilization, making it a robust and feature-rich device.

Downloads:

Samsung Galaxy Note 4 SM-N9108V Firmware Download Links (Full Files)
CSC Version Android Version Download Links
CHM N9108VZMU1DQD1 6.0.1 Download China (Google Drive)

How to Flash Samsung Galaxy Note 4 SM-N9108V with Odin

  1. Prepare Your PC: Begin by installing the official Samsung USB drivers on your computer to ensure proper device recognition.
  2. Enter Download Mode: Power off your device. Enter Download Mode by holding the Volume Down, Home, and Power buttons simultaneously while connecting the Galaxy Note 4 SM-N9108V to your PC.
  3. Launch Odin: Download and unzip the Odin flashing utility on your PC. Run the executable file to start the program.
  4. Connect the Device: Once your phone is in Download Mode and connected via USB, Odin should display an “Added” message.
  5. Load the Galaxy Note 4 SM-N9108V Firmware Files: In Odin, load each firmware component (BL, AP, CP, and CSC) into its corresponding field.
  6. Start Flashing: Click the “Start” button to initiate the firmware installation. Wait for a confirmation message like “PASS” indicating success.
  7. Finish Up: Disconnect your phone and let it reboot. It should now be running the newly installed firmware.

Read the Complete Odin Flashing Guide

Daniel
Daniel

With more than 7 years of experience in the Mobile software field (though not consistent), I hope I can be of great service to you in providing you with the firmware files that works, flashing guides that won't brick your phone and a new mobile experience.

Articles: 7343

Leave a Reply

Your email address will not be published. Required fields are marked *