LYF Wind 7 LS-5016 Firmware Flash File Download [Stock Rom]

The LYF Wind 7 (LS-5016) was a 5-inch, 4G-enabled budget smartphone from Reliance’s Lyf brand, launched in 2016. It was built on a low-end Qualcomm Snapdragon 210 processor, paired with either 1GB or 2GB of RAM, and ran the Android 5.1 Lollipop operating system. Due to its aging hardware and software, the device is prone to several critical issues. The most common and severe problem reported by users is the phone getting stuck in a bootloop, where it fails to start up and endlessly reboots at the LYF logo. This can be caused by either corrupted system files or a degraded 2250mAh battery that can no longer provide stable power. Other typical issues include severe system lag, random reboots, and apps crashing. Before assuming a hardware failure, performing a clean installation of the official stock firmware is the essential first step to rule out a software-based cause.

This guide provides the official stock ROM package for the LYF Wind 7. It is a Qualcomm device and must be flashed using the QFIL tool.

LYF Wind 7 (LS-5016) Firmware Details

Below are the key specifications for the LYF Wind 7. This firmware will restore the device to its Android 5.1.1 Lollipop software. Note that this is a Qualcomm device and requires QFIL, not SP Flash Tool.

Why Flash the Stock Firmware on Your LYF Wind 7?

A full firmware reinstallation is the main diagnostic and repair step for the specific issues this phone faces:

• Fix a Startup Bootloop: This is the most critical fix. If your phone is stuck in a restart loop, flashing the 210_160930 firmware is the definitive way to fix it if the cause is software-related. If the phone still won’t boot after a successful flash, the battery has likely failed and needs to be replaced.
• End Random Reboots and Freezes: An unstable system can restart or freeze during use. Reinstalling the base system files from the Android 5.1.1 ROM can resolve the underlying software corruption causing these crashes and improve overall stability.
• Improve System Performance: If your phone has become extremely slow and laggy, reinstalling the base OS will clear out years of software clutter and corrupted cache, restoring the phone to its original level of performance.
• Resolve Unreliable Wireless Connections: For unstable Wi-Fi or Bluetooth, flashing the firmware will reinstall the original radio drivers included in the 210_160930 package, which can solve persistent software-level connectivity bugs.
• Fix a Non-Working Camera: If the camera app fails to launch, crashes, or shows a black screen, a full re-flash of this firmware can restore the original camera drivers and application.
• Recover an Unresponsive “Bricked” Phone: In a worst-case scenario where a software error has left the phone completely unresponsive, forcing a firmware flash using QFIL is the last available recovery method.

⚠️ Important Prerequisites

Before you begin, back up any accessible data. This procedure will permanently delete everything on the phone.

• The latest version of the QPST package, which includes the QFIL tool.
• The correct Qualcomm HS-USB QDLoader 9008 drivers installed on your PC.

Download Official Firmware for LYF Wind 7 (LS-5016)

• Build: 210_160930
  • File Name: LYF_Wind_7_Black_LS-5016_MSM8909_210_160930_V5.1.1.zip
  • Size: 1007MB
  • 🔗 Download Link: Download (MediaFire)

How to Flash the Firmware

This firmware must be installed using the QFIL (Qualcomm Flash Image Loader) tool on a Windows computer. The process involves booting the phone into a special diagnostic mode known as EDL (Emergency Download) Mode.

1. Download and extract the LYF_Wind_7_..._V5.1.1.zip file to a new folder.
2. Install the Qualcomm USB drivers and the latest QPST/QFIL tool on your computer.
3. Launch QFIL.
4. Completely power off your LYF Wind 7.
5. Boot the phone into EDL Mode. This is typically done by holding both the Volume Up and Volume Down buttons simultaneously and then connecting the phone to the PC with a USB cable. The screen will remain black, but your PC should detect a “Qualcomm HS-USB QDLoader 9008” device.
6. In QFIL, select “Flat Build” and then click “Browse” to navigate to the extracted firmware folder and select the prog_emmc_firehose_...mbn file.
7. Click “Load XML” and select the rawprogram_unsparse.xml file, followed by the patch0.xml file.
8. Click the “Download” button in QFIL to begin the flashing process.

For a complete, step-by-step tutorial with screenshots, please follow a dedicated QFIL flashing guide.

Disclaimer: Flashing a Qualcomm device is an advanced procedure that will erase all your data and carries a significant risk of permanently damaging your device if not done correctly. We are not responsible for any data loss or hardware failures. Proceed with extreme caution.